Paver Calculator vs doing it by hand — which is faster?
For one easy patio, doing it by hand is fast enough. For anything with an odd size, a rectangular paver, or a count that has to be checked twice, the Paver Calculator is faster and less likely to slip a decimal place. The honest answer is to use your head for round numbers and the tool for the rest — and to use the tool to check your head either way.
At a glance
By hand: the easy cases
A 20 square metre patio with 20 cm by 20 cm pavers is a hand win: one paver is 0.04 square metres, 20 ÷ 0.04 = 500 pavers, and 500 × 1.05 = 525. The base is 20 × 0.10 = 2 cubic metres and the sand is 20 × 0.03 = 0.6 cubic metres. All three numbers are round, the division is clean, and most people can do it on paper in under a minute.
By hand: the slow cases
Try a 24 square metre patio with 200 mm by 100 mm pavers by hand. One paver is 0.20 × 0.10 = 0.02 square metres, the bare count is 24 ÷ 0.02 = 1,200 pavers, and with 5% that is 1,200 × 1.05 = 1,260 pavers. The base is 24 × 0.10 = 2.4 cubic metres and the sand is 24 × 0.03 = 0.72 cubic metres. The maths is still simple, but it is three divisions and two multiplications, and one misplaced decimal turns 1,260 into 126 or 12,600.
A worked comparison
Take a 15 square metre patio with 200 mm by 100 mm pavers. By hand that is 15 ÷ 0.02 = 750 pavers, then 750 × 1.05 = 787.5, which rounds up to 788 pavers, plus 1.5 cubic metres of base and 0.45 cubic metres of sand. With the tool you type 15, 20 and 10 and read 788 pavers in a few seconds. The answer is the same; the tool just gets there sooner and with fewer chances to slip, and it shows the base and sand without a second sum.
When the tool wins outright
Use the tool when the paver is rectangular, when the area is not a round number, or when the answer decides how much to order and pay for — a wrong count by 100 pavers is a real cost. Use it too when you are comparing two paver sizes, because changing one box shows both counts at once. For the same 20 square metres, 20 cm by 20 cm pavers need 525 and 300 mm by 300 mm pavers need 234, and seeing both side by side is quicker than doing both sums by hand.
When doing it by hand still helps
Doing the sum by hand once teaches you what the tool is doing, so you can spot a wrong input later. The check is simple: multiply the tool’s count by the paver area and see if it lands just above the patio area. For the 24 square metre patio, 1,260 × 0.02 = 25.2 square metres, which is 24 square metres plus 5% — exactly right. If the check lands far off, an input is wrong, and the hand sum has done its job.
The common mistake
People round in the middle of a hand sum and then round again at the end, which can push the count by a few pavers. Work out 20 ÷ 0.09 = 222.22 for a 20 square metre patio with 300 mm pavers, keep the decimals, and only round up at the very end to 234. The tool keeps the decimals for you, which is one more reason to let it do the sum when the numbers are not round.
Frequently asked questions
Is it faster to count pavers by hand or with the tool?
By hand for a round example like 20 m² with 20 × 20 cm pavers; with the tool for rectangular pavers, odd areas, and when the count decides an order.
How many pavers for 24 m² with 200 × 100 mm pavers?
1,260 pavers. The bare count is 24 ÷ 0.02 = 1,200, and 5% extra makes 1,260.
How many pavers for 15 m² with 200 × 100 mm pavers?
788 pavers. The bare count is 15 ÷ 0.02 = 750, and 5% extra is 787.5, which rounds up to 788.
How do I check the tool’s answer by hand?
Multiply the count by the paver area. 1,260 × 0.02 = 25.2 m², which is a 24 m² patio plus 5% — exactly right.
More guides on the Paver Calculator
- How to use the Paver Calculator — step by step
- Paver Calculator explained with worked examples
- Paver Calculator formula — how it actually works
- Paver Calculator for beginners — start here
- Common mistakes people make with the Paver Calculator
- paver calculator — the complete guide
- How to get an accurate result from the Paver Calculator
- Paver Calculator for students — with examples
- Paver Calculator for homeowners and DIYers
Try the Paver Calculator — free, in your browser.