← All blog posts

Common mistakes people make with the Paver Calculator

WhiteUI · A plain-English guide to the Paver Calculator

Most wrong paver answers are not arithmetic slips. They are measurement slips: the wrong unit, the wrong paver size, or the waste allowance left out. The Paver Calculator gives the right answer when the three inputs — area, paver length and paver width — are right, so the skill is checking those inputs before you trust the number.

At a glance

500 pavers ordered, 525 needed500 ordered (bare count)25 shortOrdering the bare count leaves you 25 pavers short
Ordering the bare count of 500 pavers for a 20 square metre patio leaves you 25 pavers short of the 525 the tool gives with the 5 percent allowance.

Mistake 1: forgetting the 5% waste

For a 20 square metre patio with 20 cm by 20 cm pavers, the bare count is 20 ÷ 0.04 = 500 pavers and the tool gives 525. Order 500 and you are 25 pavers short, which is most of a row, and a matching batch may not be in stock when you go back. The 5% covers cuts at the edges and a few broken pavers; it is already in the tool’s answer, so order the number the tool shows.

Mistake 2: mixing up centimetres and metres

A 20 cm paver is 0.20 metres. Type 20 as if it were metres and the tool works out a paver area of 20 × 20 = 400 square metres, which gives a count of less than one paver for a whole patio. Type the area in square metres and the paver size in centimetres, exactly as the tool asks, and a quick sense check — about 500 pavers for 20 square metres with 20 cm pavers — will catch the slip.

Mistake 3: using the wrong paver size

A 200 mm by 100 mm paver covers 0.02 square metres, while a 200 mm by 200 mm paver covers 0.04 square metres — twice as much. For a 12 square metre patio the small paver needs 630 pavers and the square paver needs only 315, because 12 ÷ 0.04 = 300 and 300 × 1.05 = 315. Check the size on the pack, not from memory, because the two sizes look alike in a stack.

Mistake 4: measuring the area once, wrong

A patio measured as 5 metres by 4 metres is 20 square metres, but if the real width is 4.5 metres the area is 22.5 square metres, and the count rises from 525 to 591 pavers — 22.5 ÷ 0.04 = 562.5, times 1.05 is 590.63, which rounds up to 591. Measure twice, in two places, because walls and fences are rarely as straight as they look.

Mistake 5: forgetting the base and the sand

Pavers are only part of the order. A 20 square metre patio also needs 2 cubic metres of base gravel and 0.6 cubic metres of bedding sand, and a 12 square metre patio needs 1.2 cubic metres of base and 0.36 cubic metres of sand. The tool shows both under the paver count. Ordering pavers alone means a second delivery and a second delivery charge.

Worked check

Multiply the tool’s count back by the paver area to check it. For the 20 square metre patio, 525 pavers × 0.04 square metres = 21 square metres of paver, which is the 20 square metres of patio plus the 5% allowance — exactly right. If the check gives far less than the patio area, the count is short; if it gives far more, a size was typed in wrong.

Frequently asked questions

What is the most common paver mistake?

Ordering the bare count without the waste allowance. For 20 m² with 20 × 20 cm pavers that means ordering 500 instead of 525, and running 25 pavers short.

How many pavers for 12 m² with 200 × 200 mm pavers?

315 pavers. The bare count is 12 ÷ 0.04 = 300, and 5% extra makes 315.

How do I check my paver count?

Multiply the count by the paver area. 525 pavers × 0.04 m² = 21 m², which is a 20 m² patio plus the 5% allowance.

Does the tool include base gravel and sand?

Yes. For 20 m² it gives 2 cubic metres of base gravel and 0.6 cubic metres of bedding sand, under the paver count.

More guides on the Paver Calculator

Try it yourself

Try the Paver Calculator — free, in your browser.

Open the Paver Calculator