← All blog posts

How to use the Paver Calculator — step by step

WhiteUI · A plain-English guide to the Paver Calculator

Counting pavers for a patio by hand means measuring the area, working out the area of one paver, dividing one by the other, and then adding extra for cuts and breakage. The Paver Calculator does all of that in one pass, and it also works out the base gravel and the bedding sand. Here are the five steps, using a 20 square metre patio with 20 cm by 20 cm pavers as the example.

At a glance

525 pavers for a 20 m² patio500 pavers to cover the area25 extra for cuts500 + 25 = 525 pavers
A 20 square metre patio needs 500 pavers of 20 by 20 centimetres to cover the area, plus 25 extra for cuts and breakage, making 525 in total.

Step 1: measure the patio area

Measure the length and the width of the patio in metres and multiply them. A patio 5 metres long and 4 metres wide is 5 × 4 = 20 square metres. If the patio is L-shaped, split it into two rectangles, work out each area, and add them together. Type the total area into the first box on the tool, which starts at 20 square metres.

Step 2: enter the paver size

Enter the length and the width of one paver in centimetres. For a 20 cm by 20 cm paver, type 20 in both boxes. The tool changes centimetres into metres itself, so one paver is 0.20 × 0.20 = 0.04 square metres. Check the size on the pack or measure one paver, because a 20 cm by 10 cm paver covers only half as much ground and doubles the count.

Step 3: read the paver count

The answer appears straight away: 525 pavers. The tool works it out as 20 ÷ 0.04 = 500 pavers to cover the area, then adds 5% extra for cuts and breakage, which is 500 × 1.05 = 525. The 5% is already included, so the number you see is the number to order, not the number to cover the bare area.

Step 4: read the base and the sand

Under the paver count the tool shows the base gravel and the bedding sand. For 20 square metres that is 20 × 0.10 = 2 cubic metres of base gravel, laid 100 mm deep, and 20 × 0.03 = 0.6 cubic metres of bedding sand, laid 30 mm deep. Those depths suit a patio that people walk on; a driveway carrying cars needs a deeper base, so check local guidance before ordering for one.

Step 5: check the answer before you order

Do one rough check. Twenty square metres divided by 0.04 square metres per paver is 500, so an answer near 525 makes sense and an answer near 50 or 5,000 would mean a size was typed in wrong. If the patio has curves or a diagonal pattern, order a little more than the tool says, because curves and diagonal cuts waste more pavers than straight edges do.

Worked example: a 12 square metre patio

A patio 4 metres by 3 metres is 12 square metres. With 200 mm by 100 mm pavers, one paver is 0.20 × 0.10 = 0.02 square metres, so the bare count is 12 ÷ 0.02 = 600 pavers. Add 5% and the tool gives 600 × 1.05 = 630 pavers, plus 12 × 0.10 = 1.2 cubic metres of base gravel and 12 × 0.03 = 0.36 cubic metres of bedding sand.

The common mistake

People type the paver size in centimetres into a box that expects metres, or the other way round, and get an answer out by a factor of 100. On this tool the area is in square metres and the paver size is in centimetres, so type 20 for a 20 cm paver and 20 for a 20 square metre patio, and let the tool do the change of units.

Frequently asked questions

What do I need to measure first?

The patio area in square metres. Measure the length and width in metres and multiply them; for an L-shaped patio, split it into rectangles and add the areas.

How many pavers do I need for a 20 m² patio?

525 pavers with 20 cm by 20 cm pavers. The bare count is 20 ÷ 0.04 = 500, and 5% extra for cuts makes 525.

Does the tool include base gravel and sand?

Yes. For 20 m² it gives 2 cubic metres of base gravel at 100 mm deep and 0.6 cubic metres of bedding sand at 30 mm deep.

What size do I type for a 200 mm by 100 mm paver?

Type 20 for the length and 10 for the width, in centimetres. One such paver covers 0.02 square metres.

More guides on the Paver Calculator

Try it yourself

Try the Paver Calculator — free, in your browser.

Open the Paver Calculator