How to get an accurate result from the Paver Calculator
An accurate paver result comes from three habits: measure the patio twice, check the paver size on the pack rather than from memory, and check the answer by working it backwards. The Paver Calculator already uses exact numbers, so most accuracy problems come from what is typed in, not from the tool.
At a glance
Measure the patio twice
Measure the length and the width in two places each, because walls and fences are rarely straight. A patio measured as 5 metres by 4 metres is 20 square metres, but if the real width is 4.5 metres the area is 22.5 square metres, and the count rises from 525 to 591 pavers — 22.5 ÷ 0.04 = 562.5, times 1.05 is 590.63, which rounds up to 591. Half a metre of error costs 66 pavers, which is more than a row. For an L-shaped patio, measure each rectangle on its own and add the two areas.
Check the paver size on the pack
Paver sizes are easy to mix up: 200 × 100 mm and 200 × 200 mm look alike in a stack, but one covers 0.02 square metres and the other covers 0.04. For a 12 square metre patio the small paver needs 630 pavers and the square paver needs 315, because 12 ÷ 0.04 = 300 and 300 × 1.05 = 315. Read the size off the pack or measure one paver with a tape, and type those numbers in, not the size you think you bought.
Worked example: a garden path
A path 1.2 metres wide and 5 metres long is 1.2 × 5 = 6 square metres. With 20 cm by 20 cm pavers at 0.04 square metres each, the bare count is 6 ÷ 0.04 = 150 pavers, and with 5% extra that is 150 × 1.05 = 157.5, which rounds up to 158 pavers. The base is 6 × 0.10 = 0.6 cubic metres and the sand is 6 × 0.03 = 0.18 cubic metres. A long narrow shape like this wastes more at the edges than a square patio of the same area, so keep the 5% and do not trim it.
Check the answer backwards
Multiply the tool’s count by the paver area and see if it lands just above the patio area. For the path, 158 pavers × 0.04 square metres = 6.32 square metres, which is 6 square metres plus the allowance — exactly right. For the 20 square metre patio, 525 × 0.04 = 21 square metres, which is 20 plus 5%. If the check gives far less than the patio area, the count is short; if it gives far more, a size was typed in wrong.
Match the waste to the shape
Five percent fits a rectangle laid in straight rows. Curves, diagonal patterns and many corners waste more, nearer 10%. On the 6 square metre path, 10% would give 150 × 1.10 = 165 pavers instead of 158, which is 7 more. If your patio has a curve in it, order the 10% figure rather than the tool’s 5% figure, and keep the spares for repairs later.
Another example: a 40 square metre patio
A 40 square metre patio with 300 mm by 300 mm pavers needs 40 ÷ 0.09 = 444.44 pavers before waste, and 444.44 × 1.05 = 466.67, which rounds up to 467 pavers. The base is 40 × 0.10 = 4 cubic metres and the sand is 40 × 0.03 = 1.2 cubic metres. Check it backwards: 467 × 0.09 = 42.03 square metres, which is 40 square metres plus a little over 5% — the rounding up to a whole paver explains the small extra.
The common mistake
People copy an answer, change one input, and forget the old answer belonged to the old input. Change the paver size from 20 cm by 20 cm to 300 mm by 300 mm and the count for 20 square metres falls from 525 to 234 — more than halved. Read the answer fresh after every change, and run the backwards check on the new numbers, not the old ones.
Frequently asked questions
How do I know my paver result is accurate?
Multiply the count by the paver area. 525 pavers × 0.04 m² = 21 m², which is a 20 m² patio plus the 5% allowance.
How many pavers for a 1.2 × 5 m path?
158 pavers with 20 × 20 cm pavers. The area is 6 m², the bare count is 150, and 5% extra is 157.5, which rounds up to 158.
How many pavers for 40 m² with 300 × 300 mm pavers?
467 pavers. The bare count is 40 ÷ 0.09 = 444.44, and 5% extra is 466.67, which rounds up to 467.
When should I use 10% waste instead of 5%?
For a curved patio, a diagonal pattern, or many corners. On a 6 m² path, 10% gives 165 pavers instead of 158.
More guides on the Paver Calculator
- How to use the Paver Calculator — step by step
- Paver Calculator explained with worked examples
- Paver Calculator formula — how it actually works
- Paver Calculator for beginners — start here
- Common mistakes people make with the Paver Calculator
- Paver Calculator vs doing it by hand — which is faster?
- paver calculator — the complete guide
- Paver Calculator for students — with examples
- Paver Calculator for homeowners and DIYers
Try the Paver Calculator — free, in your browser.