Paver Calculator for beginners — start here
If you have never laid pavers before, the whole job starts with two measurements and one division. Measure the patio, find the area of one paver, and divide the first by the second. The Paver Calculator does the division and adds the extra for cuts, so this guide is about getting the two measurements right.
At a glance
Start with the patio area
Measure the length and the width in metres, then multiply them. A patio 3 metres by 3 metres is 3 × 3 = 9 square metres. A patio 5 metres by 4 metres is 20 square metres. If the patio is not a neat rectangle, split it into rectangles, work out each one, and add the areas together. A tape measure and a pencil are enough; the tool takes the total area as one number.
Then read the paver size
Paver sizes are usually given in millimetres or centimetres. A paver marked 200 × 100 mm is 20 cm by 10 cm, and one marked 300 × 300 mm is 30 cm by 30 cm. Change both numbers into metres before you multiply them: 20 cm is 0.20 metres, 10 cm is 0.10 metres, and 30 cm is 0.30 metres. So a 20 cm by 20 cm paver covers 0.20 × 0.20 = 0.04 square metres, and a 200 mm by 100 mm paver covers 0.20 × 0.10 = 0.02 square metres.
Try one yourself: a 3 metre by 3 metre patio
The area is 9 square metres. With 20 cm by 20 cm pavers at 0.04 square metres each, the bare count is 9 ÷ 0.04 = 225 pavers. Add 5% for cuts and that is 225 × 1.05 = 236.25, which rounds up to 237 pavers. The base gravel is 9 × 0.10 = 0.9 cubic metres and the bedding sand is 9 × 0.03 = 0.27 cubic metres. Type 9, 20 and 20 into the tool and check that your answers match.
Try a second one: an 8 square metre patio
An 8 square metre patio with the same 20 cm by 20 cm pavers needs 8 ÷ 0.04 = 200 pavers before waste, and 200 × 1.05 = 210 pavers with the 5% allowance. The base is 8 × 0.10 = 0.8 cubic metres and the sand is 8 × 0.03 = 0.24 cubic metres. Notice the pattern: the count grows in step with the area, so a patio twice as big needs twice as many pavers of the same size.
What the tool gives you besides pavers
The tool also gives the base gravel and the bedding sand, which are the two layers under the pavers. The base is 100 mm of gravel that spreads the weight and drains water away, and the sand is a 30 mm bed that the pavers sit on. For the 9 square metre patio that is 0.9 cubic metres of gravel and 0.27 cubic metres of sand. Order both with the pavers, because a patio cannot be laid without them.
The common mistake
Beginners often mix up centimetres and metres and end up 100 times out. A 20 cm paver is 0.20 metres, not 20 metres and not 2 metres. If your answer looks wildly wrong — thousands of pavers for a small patio, or only a handful for a big one — check the units first. On this tool the area is in square metres and the paver size is in centimetres, and the tool does the change between them.
Frequently asked questions
How do I work out my patio area?
Measure the length and width in metres and multiply them. A 3 m by 3 m patio is 9 square metres; split an L-shaped patio into rectangles and add the areas.
How many pavers for a 3 × 3 m patio?
237 pavers with 20 cm by 20 cm pavers. The bare count is 9 ÷ 0.04 = 225, and 5% extra is 236.25, which rounds up to 237.
What is a 200 × 100 mm paver in metres?
0.20 m by 0.10 m, covering 0.02 square metres. A 300 × 300 mm paver covers 0.09 square metres.
What else do I need besides pavers?
Base gravel and bedding sand. For 9 m² that is 0.9 cubic metres of gravel and 0.27 cubic metres of sand.
More guides on the Paver Calculator
- How to use the Paver Calculator — step by step
- Paver Calculator explained with worked examples
- Paver Calculator formula — how it actually works
- Common mistakes people make with the Paver Calculator
- Paver Calculator vs doing it by hand — which is faster?
- paver calculator — the complete guide
- How to get an accurate result from the Paver Calculator
- Paver Calculator for students — with examples
- Paver Calculator for homeowners and DIYers
Try the Paver Calculator — free, in your browser.