← All blog posts

Paver Calculator explained with worked examples

WhiteUI · A plain-English guide to the Paver Calculator

The Paver Calculator answers three questions at once: how many pavers to order, how much base gravel to lay under them, and how much bedding sand to spread on top of the base. All three answers come from the patio area and the size of one paver, plus two fixed depths and a 5% allowance for cuts. These three examples show the whole calculation, so you can follow it and check it.

At a glance

525 pavers on a 0 to 600 scale0 pavers300 pavers600 pavers20 m² with 20 × 20 cm pavers = 525 pavers
525 pavers sits close to the top of a 0 to 600 scale, which is the count for a 20 square metre patio with 20 by 20 centimetre pavers.

Example 1: a 20 square metre patio with 20 cm by 20 cm pavers

One paver is 0.20 × 0.20 = 0.04 square metres. The bare count is 20 ÷ 0.04 = 500 pavers, and with 5% extra for cuts that is 500 × 1.05 = 525 pavers. The base gravel is 20 × 0.10 = 2 cubic metres, and the bedding sand is 20 × 0.03 = 0.6 cubic metres. This is the example the tool shows when it first loads, and it is the one to remember as a sense check for other patios.

Example 2: a 12 square metre patio with 200 mm by 100 mm pavers

A patio 4 metres by 3 metres is 12 square metres. One paver is 0.20 × 0.10 = 0.02 square metres, half the size of the paver in the first example, so the count roughly doubles. The bare count is 12 ÷ 0.02 = 600 pavers, and with 5% extra that is 600 × 1.05 = 630 pavers. The base is 12 × 0.10 = 1.2 cubic metres and the sand is 12 × 0.03 = 0.36 cubic metres. Smaller pavers mean more pavers, but the base and sand stay the same for the same area.

Example 3: the same 20 square metre patio with 300 mm by 300 mm pavers

One paver is 0.30 × 0.30 = 0.09 square metres, more than twice the area of a 20 cm by 20 cm paver. The bare count is 20 ÷ 0.09 = 222.22 pavers, and with 5% extra that is 222.22 × 1.05 = 233.33, which rounds up to 234 pavers — you cannot buy a third of a paver, so the tool always rounds the count up to a whole paver. The base is still 2 cubic metres and the sand is still 0.6 cubic metres, because the area has not changed.

Why the three examples differ

The paver count depends on the paver size, while the base and sand depend only on the area. Doubling the paver area roughly halves the count: the 0.04 square metre paver needs 525 pavers for 20 square metres, while the 0.09 square metre paver needs only 234. The base and sand are the same in both cases, 2 cubic metres and 0.6 cubic metres, because they cover the ground, not the pavers.

The common mistake

People compare paver counts for different paver sizes and think one answer must be wrong. It is not: 525 small pavers and 234 large pavers cover the same 20 square metres, because each large paver covers 0.09 square metres against 0.04 for the small one. Always compare counts for the same paver size, or the numbers will look wrong when they are right.

Frequently asked questions

How many pavers do I need for 20 m² with 20 × 20 cm pavers?

525 pavers. The bare count is 20 ÷ 0.04 = 500, and 5% extra for cuts makes 525.

How many pavers do I need for 12 m² with 200 × 100 mm pavers?

630 pavers. The bare count is 12 ÷ 0.02 = 600, and 5% extra makes 630.

How many pavers do I need for 20 m² with 300 × 300 mm pavers?

234 pavers. The bare count is 20 ÷ 0.09 = 222.22, and 5% extra is 233.33, which rounds up to 234.

Does the paver size change the base and sand?

No. Base gravel and bedding sand depend only on the area: 2 cubic metres of base and 0.6 cubic metres of sand for 20 m², whatever the paver size.

More guides on the Paver Calculator

Try it yourself

Try the Paver Calculator — free, in your browser.

Open the Paver Calculator