← All blog posts

Roofing Calculator vs doing it by hand — which is faster?

WhiteUI · A plain-English guide to the Roofing Calculator

For a flat roof, doing it by hand is quick enough. For a pitched roof, the Roofing Calculator is faster and less likely to slip a decimal place, because the hand route needs a cosine, a unit change and a division. The honest answer is to use your head for flat roofs and round numbers, and the tool for anything with a pitch.

At a glance

90 m² at 35° = 11.83 squares11.83 squaresOut of 20 squaresOrder 12 squares · 36 bundles
A 90 square metre footprint at a 35 degree pitch needs 11.83 squares, so you order 12 squares.

By hand: the flat roof

A flat roof needs no cosine, so hand maths is genuinely fast. A 50 m² flat roof is 50 × 10.7639 = 538.2 sq ft, or 5.38 squares, so order 6 squares and 18 bundles. That is one multiplication and one division, and most people can do it in under a minute with a phone calculator.

By hand: the pitched roof

Now try a 90 m² footprint at 35° by hand. First find cos(35°) = 0.8192, then 90 ÷ 0.8192 = 109.87 m², then 109.87 × 10.7639 = 1,182.6 sq ft, then 1,182.6 ÷ 100 = 11.83 squares, so order 12 squares and 36 bundles. That is four steps, each with a long decimal, and a slip in any one of them moves the answer by a square or more. With the tool, the same roof takes two typed numbers and a glance.

A second comparison

Take a larger roof, 150 m² at 25°. By hand: cos(25°) = 0.9063, 150 ÷ 0.9063 = 165.51 m², 165.51 × 10.7639 = 1,781.5 sq ft, 17.81 squares, so order 18 squares and 54 bundles. The tool gives the same 18 squares and 54 bundles from two inputs, and shows the roof area and the exact squares alongside, so you can spot a typing slip at once.

When the tool wins outright

Use the tool when you are comparing pitches, pricing several roofs, or checking a roofer’s quote. Changing the pitch from 25° to 35° on the 90 m² roof moves the answer from 10.69 squares to 11.83 squares — the order rises from 11 squares to 12, three more bundles — and the tool shows that in seconds, while doing both by hand means eight long divisions. Use your head only when the roof is flat and the number is round.

The common mistake

People doing it by hand often use a rounded cosine, such as 0.82 instead of 0.8192 for 35°, and then round again at each step. On the 90 m² roof that drift is small, but on a 200 m² roof at 45° it can move the answer by half a square. The tool keeps the full cosine, so large roofs stay accurate.

Frequently asked questions

Is it faster to work out roofing by hand or with the tool?

By hand for a flat roof; with the tool for any pitched roof, where the cosine and the unit change make hand maths slow and error-prone.

How many squares is 90 m² at 35°?

11.83 squares exactly, so order 12 squares, which is 36 bundles.

How many squares is 150 m² at 25°?

17.81 squares exactly, so order 18 squares, which is 54 bundles.

When should I still check by hand?

When a quote arrives. Do a rough check — a 100 m² roof at 30° is about 12.43 squares — and see if the quote is in the same range.

More guides on the Roofing Calculator

Try it yourself

Try the Roofing Calculator — free, in your browser.

Open the Roofing Calculator