← All blog posts

How to use the Roofing Calculator — step by step

WhiteUI · A plain-English guide to the Roofing Calculator

Roofing is sold by the square, and one square covers 100 square feet of roof. That is the unit the Roofing Calculator works in. You type in two numbers — the footprint area of the building in square metres and the roof pitch in degrees — and it tells you how many squares to order and how many shingle bundles that means. There is no button to press: the answer updates as you type.

At a glance

100 m² at 30° = 12.43 squares12.43 squaresOut of 20 squaresOrder 13 squares · 39 bundles
A 100 square metre footprint at a 30 degree pitch needs 12.43 squares, so you order 13 squares.

Step 1: measure the footprint area

The footprint is the area the building covers on the ground, not the area of the roof surface. Measure the length and the width of the house at ground level and multiply them. A house 10 metres long and 10 metres wide has a footprint of 100 m². If the house is L-shaped, split it into rectangles, work out each one, and add them together.

Step 2: find the roof pitch

Pitch here is the angle of the roof in degrees. A flat roof is 0° and a steep roof can reach 45° or more. If you know the rise over a 12-inch run, convert it to degrees first; if you only know the roof looks fairly steep, measure it rather than guessing, because a few degrees change the answer by a whole square on a large roof.

Step 3: type the two numbers in

Open the tool and type 100 in the footprint box and 30 in the pitch box. The tool divides the footprint by the cosine of the pitch to get the true roof area: 100 ÷ cos(30°) = 115.47 m². It then changes that to square feet — 115.47 × 10.7639 = 1,242.9 sq ft — and divides by 100 to get squares.

Step 4: read the squares to order

The big number is the squares to order, rounded up. For the example above the exact figure is 12.43 squares, so the tool shows 13 squares. Always order the rounded-up number: you cannot buy 0.43 of a square, and rounding down would leave part of the roof uncovered.

Step 5: read the bundles

Below the squares the tool shows the bundles, using the common figure of 3 bundles per square. For 13 squares that is 13 × 3 = 39 bundles. Check the pack of the shingles you plan to buy, because some products need a different number of bundles per square.

Worked example

Take the tool’s own example: a 100 m² footprint at a 30° pitch. Roof area = 100 ÷ cos(30°) = 115.47 m², which is 1,242.9 sq ft, or 12.43 squares. Rounded up, order 13 squares, which is 39 bundles at 3 per square. Waste for hips and valleys is extra, on top of this figure.

The common mistake

The most common mistake is typing the footprint area and forgetting the pitch, or leaving the pitch at 0°. At 0° the same 100 m² footprint gives only 10.76 squares, so you would order 11 squares instead of 13 and come up two squares short — six bundles short — on the day the roofers arrive.

Frequently asked questions

What two numbers does the Roofing Calculator need?

The footprint area in square metres and the roof pitch in degrees. It turns those into roof area, squares and bundles.

What is a roofing square?

One square is 100 square feet of roof area. Roofing materials are commonly priced and ordered by the square.

How many bundles are in a square?

The tool uses 3 bundles per square, the common figure for asphalt shingles. Check the pack, because it varies by product.

Does the result include waste?

No. Waste for hips, valleys and ridges is extra. Allow roughly 10% more on a complex roof.

More guides on the Roofing Calculator

Try it yourself

Try the Roofing Calculator — free, in your browser.

Open the Roofing Calculator