Roofing Calculator for beginners — start here
If you have never bought roofing before, three words do most of the work: footprint, pitch and square. The footprint is the ground area of the building. The pitch is how steep the roof is, in degrees. A square is 100 square feet of roof, and it is the unit roofing is sold in. The Roofing Calculator takes the first two and gives you the third.
At a glance
Start with the footprint
Walk around the outside of the building with a tape measure. Multiply the length by the width. A garage 8 metres long and 5 metres wide has a footprint of 40 m². That is the number to type in first. Do not measure the roof surface itself from a ladder — the tool works out the roof surface for you from the footprint and the pitch.
Then the pitch
Pitch is the angle of the roof. A nearly flat garage roof might be 10° or 15°; a normal house roof is often 25° to 35°; a steep cottage roof can be 45°. The tool accepts 0° to 60°. If you are not sure, ask the person who built the roof, or measure the rise over a known run and convert it to degrees before you type it in.
Your first calculation
Type 40 for the footprint and 20 for the pitch. The tool works out 40 ÷ cos(20°) = 42.57 m² of roof, which is 458.2 sq ft, or 4.58 squares. It rounds up to 5 squares, and 5 × 3 = 15 bundles. That is the whole answer: 5 squares, 15 bundles, for a small garage roof.
Worked example: a garden shed
A shed 6 metres by 4 metres has a footprint of 24 m². At a 30° pitch, the roof area is 24 ÷ cos(30°) = 27.71 m², which is 298.3 sq ft, or 2.98 squares. Rounded up, order 3 squares, which is 9 bundles. Even a shed needs the round-up: 2.98 squares is not 2 squares, and ordering 2 would leave the last strip of roof bare.
The common mistake
Beginners often type the floor area of the house instead of the footprint, or the other way round when the house has two floors. The tool wants the ground footprint — one floor only. A two-storey house with 100 m² of floor space over two floors may have a footprint of only 50 m², and typing 100 would double the order.
Frequently asked questions
What is a roofing square in plain words?
One square covers 100 square feet of roof. It is the unit roofing shingles are priced and ordered in.
What do I type in first?
The footprint area in square metres — length times width at ground level — then the roof pitch in degrees.
How many squares is a 40 m² garage at 20°?
4.58 squares exactly, so order 5 squares, which is 15 bundles.
Do I need to climb on the roof to measure it?
No. Measure the footprint at ground level and the pitch, and the tool works out the roof surface for you.
More guides on the Roofing Calculator
- How to use the Roofing Calculator — step by step
- Roofing Calculator explained with worked examples
- Roofing Calculator formula — how it actually works
- Common mistakes people make with the Roofing Calculator
- Roofing Calculator vs doing it by hand — which is faster?
- roofing calculator — the complete guide
- How to get an accurate result from the Roofing Calculator
- Roofing Calculator for students — with examples
- Roofing Calculator for homeowners and DIYers
Try the Roofing Calculator — free, in your browser.