roofing calculator — the complete guide
Roofing maths has only four ideas, and this guide covers all of them: the footprint, the pitch, the square and the bundle. Once you know what each one means, the Roofing Calculator is just a fast way of putting them together, and you can check any answer it gives you with the numbers in this guide.
At a glance
The four ideas
Footprint: the ground area of the building in square metres. Pitch: the roof angle in degrees, from 0° flat to 60° steep. Square: 100 square feet of roof area, the unit roofing is sold in. Bundle: a pack of shingles, with 3 bundles per square the common figure for asphalt shingles. Nothing else is needed to order roofing.
The pitch table for a 100 m² roof
For the same 100 m² footprint, the exact squares are: at 0°, 10.76 squares (order 11, 33 bundles); at 15°, 11.14 squares (order 12, 36 bundles); at 30°, 12.43 squares (order 13, 39 bundles); at 45°, 15.22 squares (order 16, 48 bundles). The roof area behind those figures is 100, 103.53, 115.47 and 141.42 m². A steep roof costs far more to cover than a shallow one of the same footprint.
How to measure
Measure the footprint at ground level, length times width, splitting an L-shape into rectangles. Measure the pitch in degrees, not as a ratio, because the tool expects degrees. If your roof is given as a rise over run, such as 6 in 12, convert it to degrees first: that rise is about 26.6°, and typing 6 as the pitch would be badly wrong.
Worked example: the full chain
Take a 100 m² footprint at 45°. Roof area = 100 ÷ cos(45°) = 100 ÷ 0.7071 = 141.42 m². In square feet: 141.42 × 10.7639 = 1,522.2 sq ft. Squares: 1,522.2 ÷ 100 = 15.22, so order 16 squares. Bundles: 16 × 3 = 48 bundles. Waste for hips and valleys is extra, on top of the 16 squares.
Ordering and checking a quote
Order the rounded-up squares, then add roughly 10% for waste on a complex roof. On the 45° example, 15.22 × 1.10 = 16.74 squares, so order 17 squares (51 bundles) rather than 16. When a roofer’s quote arrives, run the same numbers through the tool: if the quote is far above or below your figure, ask what pitch and what waste allowance they used before you agree to it.
The common mistake
The most common mistake in a complete roofing job is mixing up the two areas: ordering by the footprint and forgetting the pitch, then ordering by the roof area and forgetting the waste. Do both steps, in order — pitch first, waste second — and the number you order will cover the roof with material to spare.
Frequently asked questions
How many squares is 100 m² at 15°?
11.14 squares exactly, so order 12 squares, which is 36 bundles.
How many squares is 100 m² at 45°?
15.22 squares exactly, so order 16 squares, which is 48 bundles, before waste.
What pitch should I type in?
The roof angle in degrees, from 0° flat to 60° steep. A rise-over-run figure must be converted to degrees first.
How much waste should I add?
Roughly 10% on a complex roof with hips and valleys. On the 45° example that takes 15.22 squares to 16.74, so order 17.
How many bundles per square?
Three is the common figure for asphalt shingles, but check the pack for the product you plan to buy.
More guides on the Roofing Calculator
- How to use the Roofing Calculator — step by step
- Roofing Calculator explained with worked examples
- Roofing Calculator formula — how it actually works
- Roofing Calculator for beginners — start here
- Common mistakes people make with the Roofing Calculator
- Roofing Calculator vs doing it by hand — which is faster?
- How to get an accurate result from the Roofing Calculator
- Roofing Calculator for students — with examples
- Roofing Calculator for homeowners and DIYers
Try the Roofing Calculator — free, in your browser.