Roofing Calculator formula — how it actually works
The Roofing Calculator uses three short steps, and each one has a plain reason behind it. First it finds the true roof area from the footprint and the pitch. Then it changes square metres into square feet, because a roofing square is defined in square feet. Then it divides by 100 and rounds up to whole squares.
Roof area = footprint ÷ cos(pitch) Squares = roof area ÷ 100 sq ft Bundles = squares ordered × 3
At a glance
Step one: footprint divided by cos(pitch)
The cosine of the pitch tells you how much of the roof surface sits over each square metre of ground. At 0°, cos(0°) = 1, so the roof area equals the footprint. At 30°, cos(30°) = 0.8660, so 100 ÷ 0.8660 = 115.47 m². At 45°, cos(45°) = 0.7071, so 100 ÷ 0.7071 = 141.42 m². The steeper the roof, the smaller the cosine and the larger the roof area.
Step two: square metres to square feet
One square metre is 10.7639 square feet, so multiply the roof area by 10.7639. For the 30° example: 115.47 × 10.7639 = 1,242.9 sq ft. For the 45° example: 141.42 × 10.7639 = 1,522.2 sq ft. This step exists only because the roofing trade counts in square feet; the roof itself has not changed size.
Step three: divide by 100 and round up
One square is 100 sq ft, so divide the square feet by 100: 1,242.9 ÷ 100 = 12.43 squares, and 1,522.2 ÷ 100 = 15.22 squares. Then round up to a whole number, because shingles are ordered by the square: order 13 squares for the first roof and 16 squares for the second. Bundles follow at 3 per square: 39 bundles and 48 bundles.
Worked example: a flat roof
A flat roof is the simplest check of the formula. A 50 m² footprint at 0° gives 50 ÷ cos(0°) = 50 ÷ 1 = 50 m² of roof, which is 50 × 10.7639 = 538.2 sq ft, or 5.38 squares. Rounded up, order 6 squares, which is 18 bundles. If the formula gives anything else for a flat roof, the pitch was typed in wrong.
The common mistake
People multiply by cos(pitch) instead of dividing by it. Multiplying 100 by cos(30°) gives 86.60 m², which is smaller than the footprint — impossible, since a sloping roof is always larger than the ground it covers. If your roof area comes out smaller than your footprint, you have the division the wrong way round.
Frequently asked questions
What is the roofing formula?
Roof area = footprint ÷ cos(pitch). Then squares = roof area in square feet ÷ 100, rounded up, and bundles = squares × 3.
What is cos(30°)?
0.8660. So a 100 m² footprint at 30° has a roof area of 100 ÷ 0.8660 = 115.47 m².
How many squares is 100 m² at 45°?
15.22 squares exactly, so order 16 squares, which is 48 bundles.
Why round squares up?
You cannot buy part of a square, and rounding down would leave roof uncovered. The tool always rounds up to the next whole square.
More guides on the Roofing Calculator
- How to use the Roofing Calculator — step by step
- Roofing Calculator explained with worked examples
- Roofing Calculator for beginners — start here
- Common mistakes people make with the Roofing Calculator
- Roofing Calculator vs doing it by hand — which is faster?
- roofing calculator — the complete guide
- How to get an accurate result from the Roofing Calculator
- Roofing Calculator for students — with examples
- Roofing Calculator for homeowners and DIYers
Try the Roofing Calculator — free, in your browser.