Roofing Calculator for homeowners and DIYers
Before you order shingles or agree to a roofer’s quote, work out the squares yourself. It takes two minutes with the Roofing Calculator, and it tells you whether a quote is in the right range or far out. You need only the footprint of your house and the pitch of the roof — both of which you can find without climbing a ladder.
At a glance
Worked example: a family house, 140 m² at 25°
Roof area = 140 ÷ cos(25°) = 140 ÷ 0.9063 = 154.47 m², which is 154.47 × 10.7639 = 1,662.7 sq ft, or 16.63 squares. Rounded up, order 17 squares, which is 51 bundles. For a roof with hips and valleys, add 10% waste: 16.63 × 1.10 = 18.29 squares, so order 19 squares, which is 57 bundles. On a plain rectangular roof you may need less waste, but order the 17 squares as a minimum.
A smaller job: re-roofing a shed
A shed 6 metres by 4 metres has a footprint of 24 m². At a 30° pitch the roof area is 24 ÷ cos(30°) = 27.71 m², which is 298.3 sq ft, or 2.98 squares. Rounded up, order 3 squares, which is 9 bundles. A shed is a good first DIY roofing job precisely because the order is small: if you are one bundle short, the fix is a single trip to the supplier, not a stalled crew.
Checking a roofer’s quote
If a quote says 22 squares for your 140 m² house at 25°, ask questions: your figure is 16.63 squares, or 19 with waste, so 22 is three squares above even the waste figure. The roofer may be allowing for a complex roof, or for a different pitch, or for a product that needs more bundles per square — all fair reasons, but each one should be named on the quote. If the quote says 12 squares, it is below the plain-roof figure, and the job would run short.
What to order, and what to check on delivery
Order the squares, then check the bundles: 17 squares at 3 per square is 51 bundles, and 19 squares is 57 bundles. When the delivery arrives, count the bundles before the crew starts, and check the pack: if your shingles need 4 bundles per square rather than 3, 17 squares need 68 bundles, not 51, and that is a difference to catch on the driveway, not halfway across the roof.
The common mistake
Homeowners often order by the size of the house they live in — the floor area — rather than the footprint. A 140 m² house over two floors may have a footprint of only 70 m², and typing 140 would double the order to about 33 squares. Measure the ground floor only, or the outside of the building at ground level, and the order will match the roof.
Frequently asked questions
How many squares does a 140 m² house at 25° need?
16.63 squares exactly, so order 17 squares, 51 bundles; with 10% waste, 18.29 squares, so order 19 squares, 57 bundles.
How many bundles is 3 squares?
Nine bundles at the common figure of 3 per square. A 24 m² shed at 30° needs 3 squares, so 9 bundles.
How do I check a roofer’s quote?
Run your footprint and pitch through the tool. If the quote is far above or below your squares figure, ask what pitch and waste allowance they used.
Should I order extra for waste?
Yes, roughly 10% on a complex roof. Add it to the exact squares figure, then round up, rather than adding one square regardless of roof size.
More guides on the Roofing Calculator
- How to use the Roofing Calculator — step by step
- Roofing Calculator explained with worked examples
- Roofing Calculator formula — how it actually works
- Roofing Calculator for beginners — start here
- Common mistakes people make with the Roofing Calculator
- Roofing Calculator vs doing it by hand — which is faster?
- roofing calculator — the complete guide
- How to get an accurate result from the Roofing Calculator
- Roofing Calculator for students — with examples
Try the Roofing Calculator — free, in your browser.