← All blog posts

Roofing Calculator explained with worked examples

WhiteUI · A plain-English guide to the Roofing Calculator

The Roofing Calculator answers one question: how much roofing material does this roof need? It starts from the footprint — the area the building covers on the ground — then corrects for the slope, because a sloping roof has more surface than the flat ground beneath it. The steeper the roof, the bigger that correction.

At a glance

80 m² at 20° = 9.16 squares9.16 squaresOut of 20 squaresOrder 10 squares · 30 bundles
An 80 square metre footprint at a 20 degree pitch needs 9.16 squares, so you order 10 squares.

Example 1: a shallow roof, 80 m² at 20°

Divide the footprint by cos(20°), which is 0.9397: 80 ÷ 0.9397 = 85.13 m² of roof. Change that to square feet: 85.13 × 10.7639 = 916.4 sq ft. Divide by 100: 9.16 squares. Rounded up, order 10 squares, which is 10 × 3 = 30 bundles. A shallow pitch adds only a little area — 5.13 m² on top of the 80 m² footprint.

Example 2: a steep roof, 120 m² at 45°

At 45°, cos(45°) is 0.7071, so 120 ÷ 0.7071 = 169.71 m² of roof. In square feet that is 169.71 × 10.7639 = 1,826.7 sq ft, or 18.27 squares. Rounded up, order 19 squares, which is 19 × 3 = 57 bundles. Compare that with the same footprint at 20°, which would need only about 13 squares: the steep pitch adds nearly 50 m² of roof surface.

Example 3: a small house, 60 m² at 25°

At 25°, cos(25°) is 0.9063, so 60 ÷ 0.9063 = 66.20 m² of roof. That is 66.20 × 10.7639 = 712.6 sq ft, or 7.13 squares. Rounded up, order 8 squares, which is 8 × 3 = 24 bundles. On a small roof, one extra square is a big share of the order, so the round-up matters more, not less.

Why the pitch matters so much

The pitch correction is 1 ÷ cos(pitch). At 20° it is 1.064, at 30° it is 1.155, and at 45° it is 1.414. A 45° roof has about 41% more surface than its footprint, while a 20° roof has only about 6% more. That is why two houses with the same footprint can need very different amounts of shingles.

The common mistake

People use the footprint area as if it were the roof area. For the 120 m² house at 45°, the footprint alone is 120 × 10.7639 = 1,291.7 sq ft, or 12.92 squares — six squares short of the true 18.27. On a steep roof that mistake leaves a third of the roof uncovered.

Frequently asked questions

How many squares is 80 m² at 20°?

9.16 squares exactly, so order 10 squares, which is 30 bundles at 3 per square.

How many squares is 120 m² at 45°?

18.27 squares exactly, so order 19 squares, which is 57 bundles.

Why does a steep roof need more shingles?

A sloping roof has more surface than the flat footprint beneath it. At 45° the roof area is about 41% larger than the footprint.

How many bundles do I need?

Multiply the squares you order by 3, the common figure for asphalt shingles. Ten squares means 30 bundles.

More guides on the Roofing Calculator

Try it yourself

Try the Roofing Calculator — free, in your browser.

Open the Roofing Calculator