← All blog posts

Plant Spacing: worked example step by step

WhiteUI · A plain-English guide to the Plant Spacing Calculator

This post works one example all the way through, slowly, so you can follow each step and check it against your own bed. The crop is tomatoes, the bed is 6 m long and 1.2 m wide, and the spacing is 60 cm. Tomatoes are a good example because they are big plants with a wide spacing, which makes the arithmetic easy to follow, and because getting their spacing wrong is expensive: a tomato plant that is crowded will give you fewer fruit, not more. Check the steps on the Plant Spacing Calculator.

Twenty tomato plants in a 6 metre by 1.2 metre bed at 60 centimetre spacing: 2 rows of 10
20 tomato plants: 6 m ÷ 0.6 m = 10 plants per row, 1.2 m ÷ 0.6 m = 2 rows, 10 × 2 = 20.

Step 1: write down the bed and the spacing

Bed length: 6 m. Bed width: 1.2 m. Spacing: 60 cm, which is 0.6 m. Write all three in metres before you calculate anything, because mixing centimetres and metres is the commonest error in spacing maths. Sixty centimetres is 0.6 m, not 60 m and not 6 m, and a spacing entered as 60 instead of 0.6 would tell you that not even one plant fits. We are using the wide end of the packet range, 45 to 60 cm, because these plants grow tall and bushy.

Step 2: count the rows

Divide the width of the bed by the spacing: 1.2 ÷ 0.6 = 2 rows. Two rows fit across a 1.2 m bed at 60 cm spacing. If the bed were 1.8 m wide instead, the same division gives 1.8 ÷ 0.6 = 3 rows, and the bed would hold half as many plants again.

Step 3: count the plants in a row

Divide the length of the bed by the spacing: 6 ÷ 0.6 = 10 plants in each row. Ten plants, each 60 cm from the next, fill exactly 6 m. Multiply the two counts: 2 rows × 10 plants per row = 20 plants. That is the answer: twenty tomato plants fit in this bed at 60 cm spacing, ten in each of two rows.

Step 4: check the answer with the area

Check the count a second way, with the area. The bed is 6 × 1.2 = 7.2 m². Each plant at 60 cm spacing needs 0.6 × 0.6 = 0.36 m². Divide: 7.2 ÷ 0.36 = 20 plants. The two methods agree exactly, which is what you expect when the spacing divides neatly into both sides of the bed. If they disagreed, the row count would be the one to trust.

rows = 1.2 ÷ 0.6 = 2
plants per row = 6 ÷ 0.6 = 10
total = 2 × 10 = 20 plants
check: 7.2 m² ÷ 0.36 m² = 20 plants

What changes if the spacing is 45 cm?

Suppose you use the narrow end of the packet range, 45 cm, because you are growing a compact variety. The rows are 1.2 ÷ 0.45 = 2.67, which rounds down to 2 rows, and each row holds 6 ÷ 0.45 = 13.33, which rounds down to 13 plants, so the bed holds 2 × 13 = 26 plants. The area method says 7.2 ÷ 0.2025 = 35 plants, which is far too many: it is counting plants in the 30 cm strip left over along the width, where only two-thirds of a row would fit. The honest count is 26.

Seeds, spares and the shopping list

Twenty plants is the number that fits, so the shopping list starts there. Buying seedlings, buy 20 and add two spares: a spare costs little and a gap in a row costs a whole plant's harvest. Sowing seed, allow for germination. If the packet says 85% germination, you need 20 ÷ 0.85 = 23.5 seeds, which rounds up to 24 seeds to get 20 plants. And before you buy, check the variety: a cordon tomato that grows on a single stem can go at 45 cm, but a bush variety that spreads sideways needs the full 60 cm, and the spacing on the packet is for the variety you bought, not for tomatoes in general.

Frequently asked questions

How many tomato plants fit in a 6 m by 1.2 m bed at 60 cm spacing?

20 plants: 2 rows of 10. The area check agrees: 7.2 m² divided by 0.36 m² per plant is 20.

What if I use 45 cm spacing instead?

26 plants: 2 rows of 13. The area method says 35, but that counts plants in the leftover strip, so trust the rows.

How many seeds do I sow for 20 tomato plants?

24 seeds at 85% germination, because 20 ÷ 0.85 = 23.5, rounded up.

How do I check my plant spacing answer?

Work it out a second way with the area: bed area divided by spacing squared. If the two agree, the count is certain.

More guides on the Plant Spacing Calculator

Try it yourself

Try the Plant Spacing Calculator — free, in your browser.

Open the Plant Spacing Calculator