Plant Spacing quick reference table
Keep this table by the bed and you will rarely need to calculate. It lists how many plants fit in 1, 2, 5 and 10 square metres at four common spacings — 15, 30, 45 and 60 cm — and every figure is worked out from the same formula: plants = area ÷ spacing², rounded down. The table is a planning figure, not a shopping list: a real bed loses a few plants to its edges, so always check the table against a row count before you buy. You can check any figure here on the Plant Spacing Calculator, which gives the grid count for your exact bed size.
The table
| Spacing | 1 m² | 2 m² | 5 m² | 10 m² |
|---|---|---|---|---|
| 15 cm | 44 | 88 | 222 | 444 |
| 30 cm | 11 | 22 | 55 | 111 |
| 45 cm | 4 | 9 | 24 | 49 |
| 60 cm | 2 | 5 | 13 | 27 |
Read across a row to see how the count grows with area, and down a column to see how it falls with spacing. A single square metre at 15 cm spacing holds 44 plants — enough for a row of carrots or onions — while the same square metre at 60 cm holds just 2, which is two tomato plants and nothing else. The 30 cm row is the one most gardeners use most: 11 plants per square metre, 55 in 5 m², 111 in 10 m². If your bed is 5 m² and you are planting lettuce at 30 cm, the table says 55, and that is the number to start from before you check the rows.
The pattern in the table
Two patterns run through the table, and both are worth knowing. First, the count grows in proportion to the area: 2 m² holds twice as many plants as 1 m², and 10 m² holds ten times as many, at any spacing. Second, doubling the spacing quarters the count: at 1 m², 15 cm gives 44 plants, 30 cm gives 11, and 60 cm gives 2, because each doubling of the spacing quadruples the ground per plant. The 45 cm row sits between the 30 cm and 60 cm rows, as it should: 4 plants per square metre is between 11 and 2, but closer to 2, because 45 cm is closer to 60 cm than to 30 cm in area terms.
When the table overstates the count
The table uses the area method, which counts the leftover strips along the edges as if plants could grow in them. On a bed whose sides divide neatly by the spacing, the table is exact. On other beds it overstates the count, and the gap grows as the bed gets narrower and the spacing gets wider. Take a bed 4 m by 2.5 m — 10 m² — at 60 cm spacing. The table says 27 plants. Counting rows says the width holds 2.5 ÷ 0.6 = 4 rows, each row holds 4 ÷ 0.6 = 6 plants, and 4 × 6 = 24 plants. The table is three plants high, because it counts the 30 cm strip left along the width as if it could hold half a row. The rule is simple: use the table to plan, then count the rows to buy. If the two disagree by more than a couple of plants, trust the rows.
Common crops at a glance
Match the crop to the row. At 15 cm, you are in carrot, onion and beetroot territory: small roots and bulbs that need little room. At 30 cm, you are planting lettuce, potatoes and beans: the everyday vegetables that fill most beds. At 45 cm, you are planting cabbage, peppers and cauliflower: big plants that need room to spread. At 60 cm, you are planting tomatoes, courgettes and squash: the largest plants in the vegetable garden, each one needing a quarter of a square metre to itself. A bed that holds 44 carrots holds only 2 tomatoes, and that is why a vegetable garden needs both small beds for small crops and big beds for big ones — and why the same square metre can feed you for a week or for a day, depending on what you plant in it.
Frequently asked questions
How many plants fit in one square metre at 30 cm spacing?
11 plants. At 15 cm it is 44, at 45 cm it is 4, and at 60 cm it is 2.
How many plants fit in 10 square metres at 60 cm spacing?
27 by the area method. Counting rows on a real bed may give fewer — a 4 m by 2.5 m bed holds 24.
Why does the table round the counts down?
You cannot plant part of a plant. A division giving 27.75 plants means 27 plants, with the leftover ground too small for one more.
Does the table work for any bed shape?
As an estimate, yes. For the exact count, count the rows: a long thin bed and a square bed of the same area hold different numbers.
More guides on the Plant Spacing Calculator
- How to calculate plant spacing
- Plant Spacing formula explained simply
- Plant Spacing: worked example step by step
- Plant Spacing for beginners
- Common mistakes when calculating plant spacing
- Plant Spacing vs garden area: what's the difference
- How to use a plant spacing calculator
- Plant Spacing in real life: everyday examples
- Plant Spacing practice questions with answers
Try the Plant Spacing Calculator — free, in your browser.