← All blog posts

Plant Spacing vs garden area: what's the difference

WhiteUI · A plain-English guide to the Plant Spacing Calculator

Plant spacing and garden area are two different numbers, and confusing them is the easiest way to misjudge a bed. Spacing is the gap between two plants, measured in centimetres. Garden area is the size of the bed, measured in square metres. The area sets the ceiling — how much ground you have — and the spacing decides how many plants that ground holds. The same area can hold 111 plants or 27, depending on the spacing, and two beds with the same area can hold different numbers of plants, depending on their shape. This guide explains the difference, works through the numbers, and says when each figure is the one to use. Try the examples on the Plant Spacing Calculator.

The same 10 square metres holds 111 plants at 30 centimetre spacing and only 27 at 60 centimetre spacing
Same 10 m²: 111 plants at 30 cm, 27 at 60 cm. Doubling the spacing quarters the count.

Spacing is a distance; area is a size

Spacing answers the question "how far apart?" and it is a length: 30 cm, 45 cm, 60 cm. Area answers the question "how much ground?" and it is a size: 3.6 m², 10 m², 50 m². You need both to get a plant count: divide the area by the ground each plant needs, which is the spacing squared. At 30 cm spacing each plant needs 0.3 × 0.3 = 0.09 m². At 60 cm spacing each plant needs 0.6 × 0.6 = 0.36 m², which is four times as much ground. That is why the same 10 m² holds 111 plants at 30 cm and only 27 at 60 cm: 10 ÷ 0.09 = 111, and 10 ÷ 0.36 = 27. The area did not change. The spacing did, and it changed the count by a factor of four.

Doubling the spacing quarters the count

This is the most useful fact in spacing maths, and it follows from the square. Doubling the spacing doubles the ground each plant needs in both directions, so each plant takes four times the area, and the bed holds a quarter as many plants. At 15 cm spacing, 10 m² holds 444 plants; at 30 cm it holds 111; at 60 cm it holds 27. Each doubling quarters the count: 444 ÷ 4 = 111, and 111 ÷ 4 = 27.75, which rounds down to 27.

Same area, different shape, different count

Two beds can have the same area and hold different numbers of plants, because the grid count depends on the shape. Take two beds of 10 m² at 30 cm spacing: one is 5 m by 2 m, the other is 10 m by 1 m. The area method gives both 111 plants. Counting rows, the 5 m by 2 m bed holds 2 ÷ 0.3 = 6 rows of 5 ÷ 0.3 = 16 plants, which is 96. The 10 m by 1 m bed holds 1 ÷ 0.3 = 3 rows of 10 ÷ 0.3 = 33 plants, which is 99. The long thin bed holds three more plants, because its shape wastes less ground at the edges.

When area is all you need

Some questions need only the area. How much compost covers the bed? How much seed do you need by weight? How much mulch? Those are area questions, and spacing does not enter into them. A 10 m² bed needs the same compost whether it holds lettuce or tomatoes. But how many plants fit, how many seedlings to buy, and how much of the harvest to expect are spacing questions, and the area alone cannot answer them. If someone tells you a bed is "10 square metres" and nothing else, you know its size and nothing about what it holds.

ground per plant = spacing × spacing
plants = bed area ÷ ground per plant
double the spacing → a quarter of the plants

A quick check on your own bed

Take your bed, work out its area, and try two spacings. A bed 3 m by 1.2 m is 3.6 m². At 30 cm it holds 40 plants; at 60 cm it holds 10. Now count the rows for each: at 30 cm, 4 rows of 10; at 60 cm, 2 rows of 5. Both methods agree, and the count drops by a factor of four, exactly as the rule says. Spacing and area are partners: the area tells you how much ground you have, the spacing tells you how many plants it holds, and neither one means much without the other.

Frequently asked questions

What is the difference between plant spacing and garden area?

Spacing is the gap between plants, in centimetres. Area is the size of the bed, in square metres. Plants = area ÷ spacing².

How many plants fit in 10 square metres?

111 at 30 cm spacing, 49 at 45 cm and 27 at 60 cm. The area is the same; the spacing changes the count.

Does the shape of the bed matter?

Yes, for the grid count. A 5 m by 2 m bed holds 96 plants at 30 cm and a 10 m by 1 m bed holds 99, though both are 10 m².

What happens if I double the spacing?

The plant count quarters. Doubling the spacing doubles the ground per plant in both directions, so each plant takes four times the area.

More guides on the Plant Spacing Calculator

Try it yourself

Try the Plant Spacing Calculator — free, in your browser.

Open the Plant Spacing Calculator