← All blog posts

Plant Spacing formula explained simply

WhiteUI · A plain-English guide to the Plant Spacing Calculator

There are two plant spacing formulas, and they differ by one number. Square spacing puts plants on a grid, like squares on graph paper. Triangular spacing staggers every second row by half a spacing, like the dots on a die, so the plants sit in triangles instead of squares. The staggered layout fits more plants into the same bed, because triangles pack tighter than squares. This guide explains both formulas, works each one through with real numbers, and shows how to run the formula backwards when you know how many plants you want. Check any figure here on the Plant Spacing Calculator.

Each plant needs 0.09 square metres at 30 centimetre square spacing, and 0.0779 square metres in a triangular layout
One plant needs 0.09 m² at 30 cm square spacing, 0.0779 m² in a triangular layout, and 0.2025 m² at 45 cm.

Square spacing: each plant gets a square

In square spacing, every plant sits at the corner of a square whose sides are the spacing. A plant spaced 30 cm apart gets a square 30 cm by 30 cm, and the area of that square is 0.3 × 0.3 = 0.09 m². The formula is simple: plants = bed area ÷ spacing². Take a bed 2.4 m long and 1.2 m wide. Its area is 2.4 × 1.2 = 2.88 m². Divide by 0.09 m² per plant and you get 2.88 ÷ 0.09 = 32 plants. Counting rows gives the same answer here: 1.2 ÷ 0.3 = 4 rows of 2.4 ÷ 0.3 = 8 plants, and 4 × 8 = 32. At 45 cm spacing the square is bigger: 0.45 × 0.45 = 0.2025 m² per plant.

Triangular spacing: each plant gets a smaller piece of ground

Triangular spacing offsets every second row by half a spacing, so each plant sits in the middle of a triangle formed by three neighbours instead of at the corner of a square. The rows move closer together: the gap between rows is the spacing multiplied by 0.866, which is the square root of 3 divided by 2. At 30 cm spacing the rows are 0.3 × 0.866 = 0.26 m apart, and the ground each plant gets is 0.09 × 0.866 = 0.0779 m² instead of 0.09 m². The same 2.88 m² bed now holds 2.88 ÷ 0.0779 = 36 plants, four more than the 32 that square spacing gives. The gain is about 15% at any spacing.

Why triangular spacing fits more

The reason is packing. Squares leave a gap at the corner of every four plants that no plant can use, while triangles share their edges more tightly. The gain is real but modest — four extra plants in a 2.88 m² bed — and it comes with a trade-off. Triangular beds are harder to hoe between the rows, because the rows are no longer straight lines you can run a hoe down. For crops you hoe often, square spacing is the better choice; for crops you leave alone once planted, the extra plants are free yield.

square: plants = bed area ÷ spacing²
triangular: plants = bed area ÷ (spacing² × 0.866)
row gap (triangular) = spacing × 0.866

Running the formula backwards

Sometimes you know how many plants you want and need the spacing. The formula runs backwards just as easily. Suppose you have 24 plants and a bed 3 m by 1.2 m, which is 3.6 m². Divide the area by the number of plants: 3.6 ÷ 24 = 0.15 m² per plant. The spacing is the square root of that area: √0.15 = 0.387 m, or about 39 cm. So spacing your 24 plants 39 cm apart fills the bed evenly.

Which formula does the calculator use?

The calculator shows the grid count: it divides the length by the spacing for plants per row, divides the width by the spacing for rows, and multiplies the two, rounding each division down. That is the square spacing count, and it is the number you can actually plant. It also shows an area estimate — bed area divided by spacing squared — which is the square formula above, before edge losses. When the two differ, the grid count is the one to buy plants for, and the gap between them is the ground lost to the bed's edges. The calculator does not offer a triangular layout, so for a triangular bed add about 15% to its grid count.

Frequently asked questions

What is the plant spacing formula?

Square spacing: plants = bed area ÷ spacing². Triangular spacing: plants = bed area ÷ (spacing² × 0.866). Spacing and bed size must be in the same unit.

How much more does triangular spacing fit?

About 15% more at any spacing. A 2.88 m² bed at 30 cm holds 32 plants square and 36 triangular.

How do I find the spacing for a number of plants?

Divide the bed area by the number of plants, then take the square root. 24 plants in 3.6 m² need 0.15 m² each, so spacing is about 39 cm.

Why does the calculator show two different plant counts?

The headline count is the grid count — plants per row times rows. The area estimate ignores edge losses, so it is always the same or higher.

More guides on the Plant Spacing Calculator

Try it yourself

Try the Plant Spacing Calculator — free, in your browser.

Open the Plant Spacing Calculator