← All blog posts

How to calculate plant spacing

WhiteUI · A plain-English guide to the Plant Spacing Calculator

Plant spacing is the distance between one plant and the next, measured from the centre of one plant to the centre of the next. Working it out takes four steps: measure the bed, pick a spacing, count the rows, and count the plants in a row. This guide works through a real bed, step by step, and you can check every number on the Plant Spacing Calculator as you go.

A 3 metre by 1.2 metre bed at 30 centimetre spacing holds 40 plants: 4 rows of 10
A 3 m by 1.2 m bed at 30 cm spacing holds 40 plants: 4 rows of 10, each plant 30 cm from its neighbours.

Step 1: measure the bed

Measure the inside of the bed, in metres, from one inner edge to the other. Our example bed is 3 m long and 1.2 m wide. Measure in metres and keep one decimal place; a bed that is 3 m long is not 3.3 m long, and that 30 cm is the difference between ten plants in a row and eleven. Write the two numbers down before you do anything else, because every step after this one uses them.

Step 2: pick a spacing

The spacing comes from the seed packet or the plant label, and it is given for the plant at its full size, not as a seedling. Lettuce usually needs 25 to 30 cm, tomatoes 45 to 60 cm, carrots only 5 to 8 cm. For this example we are planting lettuce at 30 cm, which is 0.3 m. Convert centimetres to metres by dividing by 100: 30 cm is 0.3 m. This conversion is where most mistakes happen, so write the spacing in metres next to the bed size.

Step 3: count the rows

Divide the width of the bed by the spacing. The bed is 1.2 m wide and the spacing is 0.3 m, so 1.2 ÷ 0.3 = 4 rows. That is the number of rows that fit across the bed, each row 30 cm from the next. Always round down: if the division gave 4.6 rows, the answer would be 4, because a fifth row squeezed into the remaining 18 cm would leave those plants too close to their neighbours.

Step 4: count the plants in a row

Divide the length of the bed by the spacing. The bed is 3 m long and the spacing is 0.3 m, so 3 ÷ 0.3 = 10 plants in each row. Now multiply the two counts: 4 rows × 10 plants per row = 40 plants. That is the answer for this bed, and it is the number to buy or sow.

rows = bed width ÷ spacing
plants per row = bed length ÷ spacing
total plants = rows × plants per row

Why count rows instead of using the area

There is a shorter way to get a plant count: divide the area of the bed by the area each plant needs. Our bed is 3 × 1.2 = 3.6 m², and each plant at 30 cm spacing needs 0.3 × 0.3 = 0.09 m², so 3.6 ÷ 0.09 = 40 plants. Here the two methods agree, which happens when the spacing divides neatly into both sides of the bed. But they do not always agree. Take a bed 4 m by 1.5 m at 60 cm spacing: the area method says 6 ÷ 0.36 = 16 plants, but counting rows says 1.5 ÷ 0.6 = 2 rows of 4 ÷ 0.6 = 6 plants, which is 12. When the two methods disagree, trust the rows: it is the count you can actually plant.

What to do with the answer

Forty plants is the number that fits, not necessarily the number to buy. If you are buying seedlings, buy 40 and add two or three spares. If you are sowing seed, allow for germination: at 80% germination you need 50 seeds to get 40 plants, because 40 ÷ 0.8 = 50. And if the bed already has a path through it, subtract the path first. A 30 cm path across our 3 m by 1.2 m bed leaves 3 m by 0.9 m of planting space, which holds 3 rows of 10, or 30 plants, not 40.

Frequently asked questions

How do I calculate plant spacing?

Measure the bed in metres, pick a spacing in metres, then divide the width by the spacing for the number of rows and the length by the spacing for plants per row. Multiply the two counts.

How many plants fit in a 3 m by 1.2 m bed at 30 cm spacing?

40 plants: 4 rows of 10. The area check agrees: 3.6 m² divided by 0.09 m² per plant is 40.

Should I round the plant count up or down?

Down. A plant with no room is wasted, so a division that gives 4.6 rows means 4 rows.

Why does the area method sometimes give a bigger number?

It counts the leftover strips along the edges as if plants could grow in them. Counting rows is the number you can actually plant.

More guides on the Plant Spacing Calculator

Try it yourself

Try the Plant Spacing Calculator — free, in your browser.

Open the Plant Spacing Calculator