← All blog posts

How to use the Deck Board Calculator — step by step

WhiteUI · A plain-English guide to the Deck Board Calculator

Counting deck boards by hand means working out areas, dividing, adding waste and rounding up — and one slip anywhere in that chain gives the wrong order. The Deck Board Calculator does the same chain in seconds. You type in five numbers, and it tells you how many boards to buy. Here are the five steps, using a 4 metre by 3 metre deck as the example.

At a glance

4 m by 3 m deck = 30 boards30 boardsOut of 60 boards0.14 m by 3 m boards, 5% waste
A 4 metre by 3 metre deck needs 30 boards of 0.14 metres by 3 metres, with 5% waste allowed.

Step 1: measure the deck length and width

Measure the longest side of the deck and call it the length, then measure the other side and call it the width. For this example the length is 4 metres and the width is 3 metres. Measure in metres, and measure the finished deck size — the area the boards must cover — not the frame underneath it. If the deck is not a neat rectangle, measure the largest rectangle and work out the extra bits separately.

Step 2: enter the board width

Type in the width of the board face you will see once it is laid — for this example 0.14 metres, which is 140 millimetres. Common board widths run from 90 to 150 millimetres, so 0.09 to 0.15 metres. Enter the face width only, not the width plus the gap between boards. The tool asks for metres, so a 140 millimetre board is 0.14, not 140.

Step 3: enter the board length

Type in the length of one board — here 3 metres, which matches the deck width, so each board spans the deck in one piece. If your boards are shorter than the deck, the tool still works: it counts by area, and the waste allowance covers the extra joints. Pick the longest board your supplier stocks if you want fewer joints.

Step 4: set the waste allowance

Leave waste at 5% unless you have a reason to change it. Waste covers boards cut wrong, boards with a split end, and the offcuts from fitting around posts. A plain rectangle needs 5%. A deck with corners, angles or a lot of posts needs 10%. The tool adds the waste before rounding up, so you never end up a fraction of a board short.

Step 5: read the answer

The answer appears straight away: 30 boards. The tool also shows the working underneath — deck area 12 square metres, board area 0.42 square metres, exact boards before waste 28.57. Check those three numbers against your own rough maths. Twelve divided by 0.42 is 28.57, and 28.57 times 1.05 is 30.00, rounded up to 30 boards.

Worked example: a second deck

Try a 5 metre by 4 metre deck with the same 0.14 metre by 4 metre boards and 10% waste. The deck area is 20 square metres and one board covers 0.56 square metres, so the exact count is 20 divided by 0.56, which is 35.71 boards. Add 10% waste: 35.71 times 1.10 is 39.29, rounded up to 40 boards. Change any one number on the tool and the answer updates at once, so you can test a wider board or a longer board before you order.

The common mistake

People type the board width in millimetres — 140 instead of 0.14. That makes one board look 140 metres wide, and the answer comes out as 1 board. If your answer looks far too small, check the units first: deck length and width in metres, board width and length in metres, waste in percent.

Frequently asked questions

What do I need before I use the Deck Board Calculator?

The deck length and width in metres, the board width and length in metres, and a waste percentage. The tool starts with 5% waste.

How many boards does a 4 m by 3 m deck need?

30 boards, using 0.14 m by 3 m boards and 5% waste. The deck is 12 square metres, one board covers 0.42 square metres, and 12 divided by 0.42 times 1.05 is 30.00.

What waste percentage should I pick?

5% for a plain rectangle and 10% for a deck with corners, angles or posts. Waste covers cuts, split ends and offcuts.

Do I need to press a calculate button?

No. The answer updates as you type or move a slider, so you see the board count straight away.

More guides on the Deck Board Calculator

Try it yourself

Try the Deck Board Calculator — free, in your browser.

Open the Deck Board Calculator