Deck Board Calculator for homeowners and DIYers
For a homeowner or DIYer, the board count is really three questions: how much deck am I building, how many boards does that take, and what will it cost? The Deck Board Calculator answers the middle one, and this guide covers the other two — measuring a real garden deck, picking a waste figure that fits a DIY job, and turning the count into an order and a budget.
At a glance
Measure the deck you will actually build
Mark the deck outline on the ground with string or spray paint, then measure the longest length and the widest width in metres. Measure the finished surface, including any overhang past the frame — boards usually overhang the edge by a few centimetres, and that overhang still needs boards. If the deck wraps around a corner, split it into two rectangles and add the two board counts together. A single rectangle is the only shape the tool takes, so an L-shaped deck needs two runs through it.
Pick a waste figure that fits a DIY job
Five percent suits a plain rectangle built by someone who cuts carefully. For a first DIY deck, 7% to 10% is the safer choice: a miscut board, a board with a split end, and the offcuts from fitting around a post all come out of the waste allowance. Waste is cheap insurance — on a 6 metre by 5 metre deck, the gap between 5% and 10% waste is only a few boards, while a second trip to the supplier costs an afternoon.
Worked example: a 6 m by 5 m family deck
Take a 6 metre by 5 metre deck with wide 0.15 metre by 3 metre boards and 7% waste. The deck area is 30 square metres and one board covers 0.15 times 3, which is 0.45 square metres. Divide: 30 divided by 0.45 is 66.67 boards. Add 7% waste: 66.67 times 1.07 is 71.33, rounded up to 72 boards. The total length of board in that order is 72 boards times 3 metres, which is 216 metres. At ₹450 a board, the boards cost 72 times 450, which is ₹32,400. Add fixings and a delivery charge on top of that — the tool counts boards only, so budget the screws, joists and delivery separately.
Another example: a long side deck
Take an 8 metre by 3 metre deck along the side of a house, with 0.14 metre by 4 metre boards and 5% waste. The deck area is 24 square metres and one board covers 0.56 square metres, so the exact count is 24 divided by 0.56, which is 42.86 boards. Add 5% waste: 42.86 times 1.05 is 45.00, rounded up to 45 boards. At ₹450 a board that is 45 times 450, which is ₹20,250. A side deck like this is a good first DIY job because it is a plain rectangle — no corners, no posts in the middle, and every cut is a straight one.
Ordering: what to tell the supplier
Order by board size and count: 72 boards, 0.15 metres by 3 metres, for the family deck above. Ask the supplier how the boards are packed — if they come in packs of 10, 72 boards means 8 packs, which is 80 boards, and the 8 spares join the waste allowance. Check the delivery length too: 4 metre boards need a vehicle or a delivery that can carry them, while 3 metre boards fit more easily. Finally, keep one or two spare boards after the build; a matching board is hard to find a year later if one gets damaged.
The common mistake
Homeowners often order the exact count with no waste, then find the last row needs a cut board and the offcut is too short. On the 6 by 5 metre deck, the exact count is 66.67 boards, so ordering 67 leaves no margin at all — one bad cut and the deck is a board short. Order the tool’s rounded-up figure with waste, 72 boards here, and the spare boards are the ones that save the weekend.
Frequently asked questions
How many boards does a 6 m by 5 m deck need?
72 boards with 0.15 m by 3 m boards and 7% waste. Deck area 30 square metres divided by board area 0.45 square metres is 66.67, times 1.07 is 71.33, rounded up to 72.
How much do the boards cost for a 6 m by 5 m deck?
₹32,400 at ₹450 a board: 72 boards times ₹450. Fixings, joists and delivery are extra.
How many boards does an 8 m by 3 m deck need?
45 boards with 0.14 m by 4 m boards and 5% waste. Deck area 24 square metres divided by board area 0.56 square metres is 42.86, times 1.05 is 45.00.
What waste should a first-time DIYer allow?
7% to 10%. A miscut board or a split end comes out of the waste allowance, and a second trip to the supplier costs an afternoon.
How do I order deck boards?
Order by size and count — for example, 72 boards, 0.15 m by 3 m — and check how the supplier packs them and whether delivery can carry the length.
More guides on the Deck Board Calculator
- How to use the Deck Board Calculator — step by step
- Deck Board Calculator explained with worked examples
- Deck Board Calculator formula — how it actually works
- Deck Board Calculator for beginners — start here
- Common mistakes people make with the Deck Board Calculator
- Deck Board Calculator vs doing it by hand — which is faster?
- deck board calculator — the complete guide
- How to get an accurate result from the Deck Board Calculator
- Deck Board Calculator for students — with examples
Try the Deck Board Calculator — free, in your browser.