deck board calculator — the complete guide
A deck board calculator answers one question — how many boards do I need — but the answer depends on five choices: the deck size, the board width, the board length, and the waste you allow. This guide covers every input on the Deck Board Calculator, the common sizes for each one, and what happens when you change them, so you can order with confidence instead of guessing.
At a glance
The five inputs
Deck length and deck width are the finished deck size in metres — the surface the boards must cover, including any overhang. Board width is the face width in metres, usually 0.09 to 0.15 metres (90 to 150 millimetres). Board length is the length of one board in metres, often 2.4, 3, 3.6 or 4 metres. Waste is a percentage, usually 5% for a plain rectangle and 10% for a deck with corners, posts or angles. The tool multiplies length by width for the deck area, multiplies board width by board length for the board area, divides, adds waste, and rounds up.
Board widths: 90 mm to 150 mm
Board width is the choice that moves the answer most. On a 3 metre wide deck, 90 millimetre boards need 3 divided by 0.09, which is 33.33 rows, while 150 millimetre boards need 3 divided by 0.15, which is exactly 20 rows. Narrow boards show more gaps and need more pieces, fixings and cuts; wide boards need fewer pieces but each one costs more and shows any bend more clearly. The 140 millimetre board is a common middle choice, and it is the width the tool starts with.
Board lengths: fewer joints, more waste
Longer boards cover more area each, so the count falls — but only if the length suits the deck. A board longer than the deck is cut down, and the offcut may be too short to use elsewhere. A board shorter than the deck leaves joints, and each joint needs a cut and a fixing. As a rule, pick the longest board that fits the deck without leaving a useless offcut. The tool counts by area either way, so a length change shows up in the answer at once.
Worked example: a large square deck
Take a 5 metre by 5 metre deck with 0.10 metre by 2.5 metre boards and 5% waste. The deck area is 25 square metres and one board covers 0.25 square metres, so the exact count is 100 boards. Add 5% waste: 100 times 1.05 is 105 boards. The total length of board in that order is 105 boards times 2.5 metres, which is 262.5 metres of board. If one board costs ₹450, the boards cost 105 times 450, which is ₹47,250 — a useful check before you order, because the price is the count times the board price, nothing more.
Another example: a long narrow deck
Take an 8 metre by 3 metre deck with 0.14 metre by 4 metre boards and 5% waste. The deck area is 24 square metres and one board covers 0.56 square metres, so the exact count is 24 divided by 0.56, which is 42.86 boards. Add 5% waste: 42.86 times 1.05 is 45.00, rounded up to 45 boards. At ₹450 a board that is 45 times 450, which is ₹20,250. The same deck with 3 metre boards instead would need 24 divided by 0.42, which is 57.14 boards, times 1.05 is 60.00 — 60 boards, or ₹27,000 at the same price. Longer boards cost more each, so compare the total, not the price per board.
The common mistake
People compare board prices per board instead of per finished deck. A cheaper short board can cost more overall because you need more of them: 60 short boards at ₹450 is ₹27,000, while 45 long boards at the same ₹450 is ₹20,250. Work out the total for each board size on the tool, then compare the totals.
Frequently asked questions
What board sizes does the Deck Board Calculator accept?
Any size in metres. Common widths are 0.09 to 0.15 m (90 to 150 mm) and common lengths are 2.4, 3, 3.6 and 4 m.
How many boards does a 5 m by 5 m deck need?
105 boards with 0.10 m by 2.5 m boards and 5% waste. Deck area 25 square metres divided by board area 0.25 square metres is 100, times 1.05 is 105.
How many boards does an 8 m by 3 m deck need?
45 boards with 0.14 m by 4 m boards and 5% waste. Deck area 24 square metres divided by board area 0.56 square metres is 42.86, times 1.05 is 45.00.
How do I work out the cost of the boards?
Multiply the board count by the price of one board. For example, 45 boards at ₹450 each is ₹20,250.
Which board width should I choose?
140 mm is a common middle choice. Narrow 90 mm boards need more pieces; wide 150 mm boards need fewer but cost more each.
More guides on the Deck Board Calculator
- How to use the Deck Board Calculator — step by step
- Deck Board Calculator explained with worked examples
- Deck Board Calculator formula — how it actually works
- Deck Board Calculator for beginners — start here
- Common mistakes people make with the Deck Board Calculator
- Deck Board Calculator vs doing it by hand — which is faster?
- How to get an accurate result from the Deck Board Calculator
- Deck Board Calculator for students — with examples
- Deck Board Calculator for homeowners and DIYers
Try the Deck Board Calculator — free, in your browser.