Common mistakes people make with the Deck Board Calculator
Most wrong deck board answers are not bad luck. They are one of five slips, and all five are easy to spot once you know what to look for. The Deck Board Calculator gives the right answer when its five inputs are right, so the skill is checking the inputs before you trust the number — and before you pay for the boards.
At a glance
Mistake 1: millimetres typed as metres
A 140 millimetre board is 0.14 metres, not 140. Typing 140 as the board width makes one board look 140 metres wide, and the tool answers 1 board. The same slip on the deck side is just as bad: a 4 metre deck typed as 400 gives a deck area of 1,200 square metres. Check the units on every box: everything is in metres.
Mistake 2: forgetting waste
A 5 metre by 4 metre deck with 0.14 metre by 4 metre boards needs 35.71 boards before waste, which rounds up to 36. With 10% waste it needs 40. Ordering 36 boards leaves you 4 short, and a second delivery of 4 boards costs more in time and delivery than the boards themselves. Set the waste before you read the answer, not after.
Mistake 3: the wrong board length
Board length changes the board area, so it changes the count. A 0.14 metre board that is 3 metres long covers 0.42 square metres, but the same board at 4 metres long covers 0.56 square metres. On a 12 square metre deck, the 3 metre board gives 12 divided by 0.42, which is 28.57 boards, while the 4 metre board gives 12 divided by 0.56, which is 21.43 boards. Enter the length you will actually buy, not the length you wish you could buy.
Mistake 4: rounding down
A result of 39.29 boards is not 39 boards — 39 boards cover less than the deck. The tool rounds up to 40, and that is the number to order. Rounding down feels thrifty, but it leaves a strip of deck with no boards, and one missing board is harder to fix than one spare board is to store.
Mistake 5: measuring the frame, not the deck
The deck area is the finished surface the boards must cover, including any overhang past the frame. If the frame is 4 metres by 3 metres but the boards overhang by 0.1 metres on each side, the finished deck is 4.2 metres by 3.2 metres, which is 13.44 square metres — not 12. That extra 1.44 square metres needs about 4 more boards at 0.42 square metres each. Measure the finished deck, overhang included.
Worked check
Take the 5 metre by 4 metre deck again: 20 square metres, boards 0.14 by 4 metres, waste 10%. The exact count is 35.71, waste adds 3.57 boards, and the total is 39.29, rounded up to 40. If your answer is 36, you forgot the waste. If it is 1, you typed millimetres as metres. If it is much lower than 40, check the board length: using 3 metre boards instead of 4 metre boards on this deck gives 20 divided by 0.42, which is 47.62, times 1.10 is 52.38, rounded up to 53 boards — a very different answer from the same deck.
Frequently asked questions
What is the most common deck board mistake?
Typing the board width in millimetres instead of metres. A 140 mm board is 0.14 m — typing 140 gives an answer of 1 board.
How many boards short will I be if I forget waste?
On a 5 m by 4 m deck with 10% waste, 4 boards short: 36 boards without waste against 40 with waste.
Should I round the board count up or down?
Up, always. A result of 39.29 boards means 39 boards do not cover the deck, so order 40.
Should I measure the frame or the finished deck?
The finished deck, including any overhang. Boards must cover the finished surface, not just the frame underneath.
More guides on the Deck Board Calculator
- How to use the Deck Board Calculator — step by step
- Deck Board Calculator explained with worked examples
- Deck Board Calculator formula — how it actually works
- Deck Board Calculator for beginners — start here
- Deck Board Calculator vs doing it by hand — which is faster?
- deck board calculator — the complete guide
- How to get an accurate result from the Deck Board Calculator
- Deck Board Calculator for students — with examples
- Deck Board Calculator for homeowners and DIYers
Try the Deck Board Calculator — free, in your browser.