← All blog posts

Deck Board Calculator vs doing it by hand — which is faster?

WhiteUI · A plain-English guide to the Deck Board Calculator

For one small deck with round numbers, doing it by hand is quick enough. For anything bigger — a deck with an awkward size, a board width in millimetres, or a waste percentage to add — the Deck Board Calculator is faster and less likely to slip a decimal place. The honest answer is to use your head for round numbers and the tool for the rest, and to use the tool as a check even when you do it by hand.

At a glance

7 m by 4 m deck: tool vs by handTool: about 5 secondsBy hand: about 45 secondsBoth give 60 boards
Working out a 7 metre by 4 metre deck takes about 5 seconds with the tool and about 45 seconds by hand — the answer is 60 boards either way.

By hand: the easy cases

Some deck sums are genuinely quick in your head. A 5 metre by 5 metre deck with 0.10 metre by 2.5 metre boards is one of them: the deck is 25 square metres, one board covers 0.25 square metres, and 25 divided by 0.25 is exactly 100 boards. Add 5% waste — 100 times 1.05 is 105 — and the answer is 105 boards. Round numbers like these are why a quick hand check is worth doing even when you use the tool: if the tool says 105 and your head says about 100 before waste, the two agree.

By hand: the slow cases

Try a 7 metre by 4 metre deck with 0.14 metre by 3.5 metre boards and 5% waste, by hand. The deck area is 28 square metres and one board covers 0.14 times 3.5, which is 0.49 square metres. Then 28 divided by 0.49 is 57.14 boards — already an awkward division — and 57.14 times 1.05 is 60.00, rounded up to 60 boards. Most people need a calculator for the division alone, and one misplaced decimal turns 57.14 into 5.71 or 571. The tool gives the same 60 boards in one step, and shows the 57.14 underneath so you can see where it came from.

A timed comparison

Take that 7 metre by 4 metre deck. By hand, with a pocket calculator, the three steps — area, division, waste — take about 45 seconds, and longer if you have to convert 140 millimetres to 0.14 metres first. With the tool you type 7, 4, 0.14, 3.5 and 5, and read 60 boards in about 5 seconds. The answer is the same; the tool just gets there sooner and with fewer chances to slip. The gap grows when you compare options: testing three board widths by hand means three full calculations, while the tool needs only the width changed each time.

When the tool wins outright

Use the tool when the deck size is not round, when the board width is 90 or 140 millimetres rather than a neat 100, when you are comparing two board sizes before ordering, or when the answer decides how much money you spend. A 3 metre by 2.4 metre deck with 0.14 metre by 3 metre boards needs 17.14 boards before waste and 18 after it — a small job where being one board short still means a second trip to the supplier. Use your head when the numbers are round and the answer is a rough check, not an order.

The common mistake

People round in the middle of a hand calculation and then round again at the end. Rounding 57.14 down to 57 before adding waste gives 57 times 1.05, which is 59.85, rounded up to 60 — the same answer here, by luck. But rounding 35.71 down to 35 before adding 10% waste gives 38.50, rounded up to 39, while the true answer is 40. The tool keeps the full number until the final rounding, so it never loses a board to an early round.

Frequently asked questions

Is it faster to work out deck boards by hand or with the tool?

By hand for round numbers, such as a 5 m by 5 m deck with 0.10 m boards. With the tool for awkward sizes, millimetre widths, and comparing board sizes.

How many boards does a 7 m by 4 m deck need?

60 boards with 0.14 m by 3.5 m boards and 5% waste. Deck area 28 square metres divided by board area 0.49 square metres is 57.14, times 1.05 is 60.00.

How many boards does a 5 m by 5 m deck need?

105 boards with 0.10 m by 2.5 m boards and 5% waste. Deck area 25 square metres divided by board area 0.25 square metres is exactly 100, times 1.05 is 105.

When should I still check by hand?

When the answer decides an order. Do a rough check — a 12 square metre deck with 0.42 square metre boards is about 29 boards before waste — and see if the tool agrees.

More guides on the Deck Board Calculator

Try it yourself

Try the Deck Board Calculator — free, in your browser.

Open the Deck Board Calculator