Deck Board Calculator for beginners — start here
If you have never bought deck boards before, the whole job comes down to three measurements and one idea: boards cover an area, so you divide the deck’s area by one board’s area. The Deck Board Calculator does the division for you, but knowing what each box means stops the two mistakes beginners make most — wrong units and a forgotten waste allowance.
At a glance
Start with the deck: two measurements
Measure the deck in metres, length first and then width. A tape measure along the longest edge gives the length; the other edge gives the width. Write both down. For the worked example below, the deck is 2.4 metres long and 2 metres wide, which is a small deck — a balcony or a step up to a door. If your deck is L-shaped, split it into two rectangles, work out each one, and add the board counts together.
Then the board: width and length
A deck board has two sizes that matter. The width is the face you walk on — common widths are 90, 120, 140 and 150 millimetres, which are 0.09, 0.12, 0.14 and 0.15 metres. The length is how long one board is, often 2.4, 3 or 3.6 metres. Wider boards mean fewer boards to buy and fewer gaps to look at, but each board costs more. Shorter boards are easier to carry and cut, but they leave more joints.
Try one yourself
Take the small deck: 2.4 metres by 2 metres, boards 0.12 metres wide and 2.4 metres long, waste 5%. First the deck area: 2.4 times 2 is 4.8 square metres. Then one board’s area: 0.12 times 2.4 is 0.288 square metres. Divide: 4.8 divided by 0.288 is 16.67 boards. Add 5% waste: 16.67 times 1.05 is 17.50, rounded up to 18 boards. Type the same numbers into the tool and check that your answers match — 18 boards, with 16.67 before waste.
What waste means, in plain words
Waste is the extra boards you buy for the pieces that get cut off or damaged. Every deck needs some cuts: the last board in a row is rarely a full board, and a board can split at the end. Five percent on 16.67 boards is 0.83 boards, which is why the count rises from 16.67 to 17.50 before rounding. On a plain rectangle, 5% is enough. If your deck has steps, posts or an angled edge, use 10% instead.
The common mistake
Beginners often enter the board width in millimetres — 120 instead of 0.12. The tool then thinks one board is 120 metres wide and answers 1 board, which is plainly wrong. The rule is simple: every length on the tool is in metres, so divide millimetres by 1,000 first. A 120 millimetre board is 0.12 metres, and a 90 millimetre board is 0.09 metres.
Frequently asked questions
What do I measure first for a deck?
The deck length and width in metres. Those two numbers give the deck area, which is the starting point for the board count.
How many boards does a 2.4 m by 2 m deck need?
18 boards with 0.12 m by 2.4 m boards and 5% waste. Deck area 4.8 square metres divided by board area 0.288 square metres is 16.67, times 1.05 is 17.50, rounded up to 18.
What board width should a beginner pick?
140 mm (0.14 m) is a common middle choice. Narrow 90 mm boards need more pieces, and wide 150 mm boards need fewer but cost more each.
What is waste, and how much do I need?
Waste is extra boards for cuts and damage. Use 5% for a plain rectangle and 10% for a deck with steps, posts or angled edges.
More guides on the Deck Board Calculator
- How to use the Deck Board Calculator — step by step
- Deck Board Calculator explained with worked examples
- Deck Board Calculator formula — how it actually works
- Common mistakes people make with the Deck Board Calculator
- Deck Board Calculator vs doing it by hand — which is faster?
- deck board calculator — the complete guide
- How to get an accurate result from the Deck Board Calculator
- Deck Board Calculator for students — with examples
- Deck Board Calculator for homeowners and DIYers
Try the Deck Board Calculator — free, in your browser.