← All tools/Tools/Garden & Outdoor/Deck Board Calculator
Deck Board Calculator
Find how many deck boards a rectangular deck needs, including a waste allowance.
Boards needed
How it works
deck area = length × width board area = board width × board length boards = deck area ÷ board area × (1 + waste), rounded up
Deck area is the length multiplied by the width, in metres. One board covers its width multiplied by its length — a 0.14 m wide, 3 m long board covers 0.42 m². Dividing the deck area by the board area gives the exact number of boards before waste, and the waste percentage is then added and the result rounded up, because boards are sold whole and a part-board still costs a full board.
Enter the width of the board face you will see, not the width including the gap between boards — the gap is dead space, not board. The waste figure covers boards cut to length, boards rejected for knots or warping, and offcuts too short to reuse. Five percent suits a plain rectangular deck; use 10% or more for diagonal layouts, where every cut wastes a triangle.
Worked example: a 12 m² deck with 0.14 m × 3 m boards needs ceil(12 ÷ 0.42 × 1.05) = 30 boards.
Second worked example: a 5 m × 3.6 m deck is 18 m². Boards 0.14 m wide and 3 m long cover 0.42 m² each, so the exact count is 18 ÷ 0.42 = 42.86 boards. With 10% waste, 42.86 × 1.10 = 47.14, rounded up to 48 boards. Order 48 — the two extra boards cover the cuts at the edges.
Common mistakes
The costliest mistake is measuring the board width with the gap included. A 140 mm board with a 5 mm gap looks 145 mm wide, but only 140 mm of it is board — entering 0.145 m instead of 0.14 m under-counts by about 4%, which on a 48-board deck is two boards short. Measure the face of the board itself, and let the calculator handle the rest.
The second mistake is trusting area alone when boards are shorter than the deck. This calculator works on area, so it assumes boards can be cut and joined to fit — but if your boards are 3 m long and the deck is 3.6 m wide, every row needs a joint, and joints should land on a joist. Sketch the layout before you order. And buy boards from one batch where you can: timber varies in shade, and a board bought later rarely matches.
Finally, do not set waste to zero to save money. The cuts at the edges alone usually eat 3–5% on a rectangular deck, and a single damaged board can hold up the whole job while you wait for a replacement.
Frequently asked questions
Does the board count include waste?
Yes, it adds the waste percentage you set, defaulting to 5 percent, then rounds up to whole boards.
What board width should I enter?
Enter the width of the board face you will see, not including any gap between boards.
Do I need extra boards for stairs or edging?
Yes, measure those separately and add them, since this calculator covers the main deck rectangle only.
What if my deck is not a rectangle?
Split it into rectangles, run the calculator once for each part, and add the counts. An L-shaped deck made of a 4 × 3 m part and a 2 × 2 m part is two separate calculations — measuring the whole shape as one rectangle will over-count the area and order boards you do not need.
Should I buy exactly the number the calculator gives?
Buy that number as a minimum, and round up to the nearest pack if boards are sold in packs. The count already includes your waste percentage, but a board with a bad knot or a wrong cut still needs replacing — ordering one or two extra boards is cheaper than a second trip to the timber yard.
Guides
Step-by-step guides for this calculator:
- Deck Board Calculator for beginners — start here
- Deck Board Calculator formula — how it actually works
- Deck Board Calculator explained with worked examples
- How to use the Deck Board Calculator — step by step
- Deck Board Calculator for students — with examples
- deck board calculator — the complete guide
- Common mistakes people make with the Deck Board Calculator
- How to get an accurate result from the Deck Board Calculator
- Deck Board Calculator vs doing it by hand — which is faster?
- Deck Board Calculator for homeowners and DIYers
More tools
Tell us what you think
Loving this tool, or stuck on something? Tell us — it takes a minute.
We’ll only use your name and email to reply if needed. The tool and page are filled in for you.