sand calculator — the complete guide
Sand is sold by volume, weighed in tonnes and often bought in bags, so one job needs three numbers that all describe the same pile. This guide covers every part of the Sand Calculator: the three inputs, the four-step maths, the common depths for patios, paths, sandpits and garden beds, and how to choose between bags and bulk delivery.
At a glance
The three inputs
Length and width describe the area, and depth describes how thick the sand layer will be. All three are in metres. Length and width are usually whole numbers or simple halves, such as 4, 5 or 2.5 metres. Depth is usually a small decimal: 0.05 metres for a thin levelling layer, 0.1 metres for a patio base, 0.15 metres for a garden bed and 0.25 to 0.3 metres for a sandpit.
The four-step maths
Area is length times width. Volume is area times depth. Weight is volume times 1,600 kilograms per cubic metre, divided by 1,000 to give tonnes. Bags are the weight in kilograms divided by 25, rounded up. For the tool’s starting values, 5 metres by 2 metres at 0.1 metres deep, that is 10 square metres, 1 cubic metre, 1.6 tonnes and 64 bags.
How depth changes the answer
Depth is the lever that moves the answer most, because it multiplies the whole area. For a 10-square-metre area, 0.05 metres deep needs 0.5 cubic metres, 0.8 tonnes and 32 bags; 0.1 metres deep needs 1 cubic metre, 1.6 tonnes and 64 bags; 0.15 metres deep needs 1.5 cubic metres, 2.4 tonnes and 96 bags; and 0.2 metres deep needs 2 cubic metres, 3.2 tonnes and 128 bags. Doubling the depth doubles everything, so measuring the depth right matters more than measuring the length right.
Common jobs and their depths
A patio base is usually 0.1 metres deep, a path 0.05 to 0.1 metres, a sandpit 0.25 to 0.3 metres, and a garden bed 0.15 to 0.2 metres. A sandpit 2 metres by 2 metres at 0.25 metres deep needs 2 × 2 × 0.25 = 1 cubic metre, which is 1.6 tonnes and 64 bags. A garden bed 3 metres by 1.5 metres at 0.2 metres deep needs 3 × 1.5 × 0.2 = 0.9 cubic metres, which is 1.44 tonnes and 58 bags.
Bags or bulk delivery?
Up to about 1 cubic metre, bags are practical: 64 bags is a lot of lifting but no delivery charge. Between 1 and 2 cubic metres, compare the price of bags against a bulk bag, which usually holds about 0.9 cubic metres. Above 2 or 3 cubic metres, a loose bulk delivery is usually cheaper, because 3.6 cubic metres is 231 bags and nobody wants to carry that many.
The common mistake
People measure the length and width carefully and then guess the depth. Guessing 0.1 metres when the real depth is 0.15 metres leaves a third of the sand missing: for a 10-square-metre area, that is 0.5 cubic metres, or 32 bags, short. Measure the depth with a ruler in two or three places and use the largest reading.
Frequently asked questions
What depths do common sand jobs need?
A patio base is usually 0.1 m, a path 0.05 to 0.1 m, a garden bed 0.15 to 0.2 m, and a sandpit 0.25 to 0.3 m.
How much sand does 10 square metres at 0.15 m deep need?
1.5 cubic metres, which weighs 2.4 tonnes, or 96 bags of 25 kg.
How much sand does a 2 m by 2 m sandpit at 0.25 m deep need?
1 cubic metre, which weighs 1.6 tonnes, or 64 bags of 25 kg.
When should I order bulk sand instead of bags?
Above about 2 or 3 cubic metres, bulk delivery is usually cheaper. Below 1 cubic metre, bags are practical.
How much does one cubic metre of sand weigh?
About 1.6 tonnes, or 1,600 kilograms, for dry sand.
More guides on the Sand Calculator
- How to use the Sand Calculator — step by step
- Sand Calculator explained with worked examples
- Sand Calculator formula — how it actually works
- Sand Calculator for beginners — start here
- Common mistakes people make with the Sand Calculator
- Sand Calculator vs doing it by hand — which is faster?
- How to get an accurate result from the Sand Calculator
- Sand Calculator for students — with examples
- Sand Calculator for homeowners and DIYers
Try the Sand Calculator — free, in your browser.