Sand Calculator explained with worked examples
The Sand Calculator does one job: it works out how much sand fills a rectangle. It multiplies length by width to get the area, multiplies the area by the depth to get the volume, then turns the volume into a weight and a bag count. Three examples, each with different sizes, show how the same three steps handle a garden bed, a sandpit and a path.
At a glance
Example 1: a garden bed, 6 m by 4 m at 0.15 m deep
First the area: 6 × 4 = 24 square metres. Then the volume: 24 × 0.15 = 3.6 cubic metres. The weight follows from the tool’s figure of 1,600 kilograms per cubic metre for dry sand: 3.6 × 1,600 = 5,760 kilograms, which is 5.76 tonnes. The bags are 5,760 ÷ 25 = 230.4, rounded up to 231 bags. A bed this size is a bulk delivery, not a bag job, which is exactly what the tonne figure tells you.
Example 2: a small sandpit, 2.5 m by 2 m at 0.05 m deep
The area is 2.5 × 2 = 5 square metres, and the volume is 5 × 0.05 = 0.25 cubic metres. The weight is 0.25 × 1,600 = 400 kilograms, or 0.4 tonnes, and the bags are 400 ÷ 25 = 16 exactly. A shallow layer like this is where bags make sense: 16 bags from a garden centre, carried in a few trips, with no delivery lorry needed.
Example 3: a path, 10 m by 1 m at 0.1 m deep
The area is 10 × 1 = 10 square metres and the volume is 10 × 0.1 = 1 cubic metre. The weight is 1 × 1.6 = 1.6 tonnes and the bags are 1,600 ÷ 25 = 64. This is the anchor example to remember: a 10-square-metre area at 10 centimetres deep is exactly 1 cubic metre, 1.6 tonnes and 64 bags, so any area twice as big at the same depth is 2 cubic metres, 3.2 tonnes and 128 bags.
Why the weight uses 1,600 kg per cubic metre
Dry sand weighs about 1,600 kilograms per cubic metre, so the tool multiplies the volume by 1.6 to get tonnes. Wet sand can be heavier, because water fills the gaps between the grains, so a result for wet sand is a lower bound rather than an exact weight. For ordering, the volume is the number that matters most; the weight tells you whether to order bags or a bulk delivery.
The common mistake
People round the bag count down. In the garden bed example, 230.4 bags rounded down to 230 leaves 10 kilograms short, which is nearly half a bag. The tool rounds up, because a bag you do not need is a small waste and a bag you do need is a second trip.
Frequently asked questions
How much sand does a 6 m by 4 m bed at 0.15 m deep need?
3.6 cubic metres, which weighs 5.76 tonnes, or 231 bags of 25 kg.
How much sand does a 2.5 m by 2 m sandpit at 0.05 m deep need?
0.25 cubic metres, which weighs 0.4 tonnes, or 16 bags of 25 kg.
How much sand does a 10 m by 1 m path at 0.1 m deep need?
1 cubic metre, which weighs 1.6 tonnes, or 64 bags of 25 kg.
Why does the tool use 1,600 kg per cubic metre?
That is a common figure for dry sand. Wet sand can be heavier, so treat the weight as an estimate and the volume as the figure to order by.
More guides on the Sand Calculator
- How to use the Sand Calculator — step by step
- Sand Calculator formula — how it actually works
- Sand Calculator for beginners — start here
- Common mistakes people make with the Sand Calculator
- Sand Calculator vs doing it by hand — which is faster?
- sand calculator — the complete guide
- How to get an accurate result from the Sand Calculator
- Sand Calculator for students — with examples
- Sand Calculator for homeowners and DIYers
Try the Sand Calculator — free, in your browser.