← All blog posts

How to use the Sand Calculator — step by step

WhiteUI · A plain-English guide to the Sand Calculator

Ordering sand starts with three measurements: how long the area is, how wide it is, and how deep the sand needs to be. The Sand Calculator turns those three numbers into a volume in cubic metres, a weight in tonnes, and a count of 25 kg bags. Here are the five steps, using a patio 4 metres long, 3 metres wide and 0.1 metres deep as the example.

At a glance

Patio 4 m × 3 m × 0.1 m = 1.2 m³1.2 m³ sandOut of 2 m³1.2 m³ = 1.92 tonnes = 77 bags
A patio 4 metres long, 3 metres wide and 0.1 metres deep needs 1.2 cubic metres of sand, which weighs 1.92 tonnes.

Step 1: measure the length and width

Measure the longest side first, then the side across it, both in metres. For the patio that is 4 metres by 3 metres, which gives an area of 4 × 3 = 12 square metres. Measure at the widest point if the edges are uneven, and write the numbers down before you open the tool so you do not have to guess them later.

Step 2: decide the depth

Depth is the thickness of the sand layer, also in metres. A patio base is often 0.1 metres, which is 10 centimetres. A sandpit for children is deeper, often 0.25 to 0.3 metres. If you measured the depth in centimetres, divide by 100 first: 10 centimetres is 0.1 metres, 15 centimetres is 0.15 metres and 5 centimetres is 0.05 metres.

Step 3: type the three numbers into the tool

Put 4 in the Length box, 3 in the Width box and 0.1 in the Depth box. You can type the numbers or move the sliders beside them; both change the same value. The tool accepts decimals, so 4.5 metres or 0.12 metres are fine.

Step 4: read the three answers

The tool shows the volume first: 12 × 0.1 = 1.2 cubic metres. Under it you will see the weight, 1.2 × 1,600 = 1,920 kilograms, which is 1.92 tonnes, and the bag count, 1,920 ÷ 25 = 76.8, rounded up to 77 bags of 25 kg. Rounding up matters, because 76 bags would leave you 20 kilograms short.

Step 5: check the answer before you order

Do one quick sense check. A cubic metre of dry sand weighs about 1.6 tonnes, so 1.2 cubic metres should weigh just under 2 tonnes, and 1.92 tonnes does. If the tool showed 12 tonnes, you would know a decimal point had slipped, most likely in the depth.

Worked example

Try the tool’s own starting values: 5 metres long, 2 metres wide and 0.1 metres deep. The area is 5 × 2 = 10 square metres, the volume is 10 × 0.1 = 1 cubic metre, the weight is 1 × 1.6 = 1.6 tonnes, and the bags are 1,600 ÷ 25 = 64 exactly. One cubic metre, 64 bags, is a handy figure to remember, because every other answer scales from it.

The common mistake

People type the depth in centimetres instead of metres. Typing 10 instead of 0.1 for a 10-centimetre layer gives 4 × 3 × 10 = 120 cubic metres, a hundred times too much. Always convert centimetres to metres first, then type the number in.

Frequently asked questions

What three numbers does the Sand Calculator need?

Length, width and depth, all in metres. It returns the volume in cubic metres, the weight in tonnes and the number of 25 kg bags.

How do I enter a depth of 10 centimetres?

Type 0.1, because 10 centimetres divided by 100 is 0.1 metres. The tool works in metres, so every measurement must be in metres first.

How many 25 kg bags are in 1.2 cubic metres of sand?

77 bags. 1.2 cubic metres weighs 1.92 tonnes, which is 1,920 kilograms, and 1,920 divided by 25 is 76.8, rounded up to 77.

Does the result update as I type?

Yes. The volume, weight and bag count update as you type or move a slider, with no calculate button to press.

More guides on the Sand Calculator

Try it yourself

Try the Sand Calculator — free, in your browser.

Open the Sand Calculator