Sand Calculator for beginners — start here
If you have never ordered sand before, the only idea you need is that sand fills a box shape: length, width and depth, multiplied together. The Sand Calculator does the multiplication for you, but knowing what the three answers mean — cubic metres, tonnes and bags — is what stops you ordering twice as much as you need, or half as much.
At a glance
Start with the three units
Length, width and depth are all measured in metres. The volume is measured in cubic metres, written m³, which is the amount of sand that fills a box 1 metre long, 1 metre wide and 1 metre deep. The weight is measured in tonnes, where 1 tonne is 1,000 kilograms. The bags are 25-kilogram bags, the size most garden centres sell, and 40 of them make a tonne.
Your first example: 4 m by 2 m at 0.1 m deep
The area is 4 × 2 = 8 square metres. The volume is 8 × 0.1 = 0.8 cubic metres. The weight is 0.8 × 1,600 = 1,280 kilograms, or 1.28 tonnes. The bags are 1,280 ÷ 25 = 51.2, rounded up to 52 bags. Try it on the tool and check that your three answers match: 0.8 cubic metres, 1.28 tonnes, 52 bags.
Your second example: a thin layer, 3 m by 2 m at 0.05 m deep
The area is 3 × 2 = 6 square metres and the volume is 6 × 0.05 = 0.3 cubic metres. The weight is 0.3 × 1,600 = 480 kilograms, or 0.48 tonnes, and the bags are 480 ÷ 25 = 19.2, rounded up to 20 bags. Notice how halving the depth halves everything: the same 3 by 2 area at 0.1 metres deep would need 0.6 cubic metres and 40 bags, exactly double.
Centimetres into metres
Most people measure depth with a ruler in centimetres, so the one conversion to learn is dividing by 100. Five centimetres is 0.05 metres, 10 centimetres is 0.1 metres, 15 centimetres is 0.15 metres and 30 centimetres is 0.3 metres. Length and width are usually already in metres, so depth is the only number that usually needs converting.
When to buy bags and when to order bulk
Up to about 1 cubic metre, bags are practical: 52 bags is heavy but manageable in a car over a few trips. Above 2 or 3 cubic metres, bulk delivery is usually cheaper and far less lifting, because 3.6 cubic metres is 231 bags. The tonne figure on the tool is your guide: under 2 tonnes, think bags; over 3 tonnes, think bulk.
The common mistake
Beginners often type the depth as 10 for a 10-centimetre layer, forgetting the centimetre-to-metre conversion. That gives 4 × 2 × 10 = 80 cubic metres instead of 0.8, a hundred times too much. If your volume looks bigger than the area itself, check the depth first: it should be a small decimal like 0.1, not a whole number like 10.
Frequently asked questions
What does a cubic metre of sand look like?
A box 1 metre long, 1 metre wide and 1 metre deep. It weighs about 1.6 tonnes, or 64 bags of 25 kg.
How much sand does a 4 m by 2 m area at 0.1 m deep need?
0.8 cubic metres, which weighs 1.28 tonnes, or 52 bags of 25 kg.
How do I turn 10 centimetres into metres?
Divide by 100. 10 centimetres is 0.1 metres, 5 centimetres is 0.05 metres and 15 centimetres is 0.15 metres.
Should I buy bags or order bulk sand?
Up to about 1 cubic metre, bags are practical. Above 2 or 3 cubic metres, bulk delivery is usually cheaper and far less lifting.
More guides on the Sand Calculator
- How to use the Sand Calculator — step by step
- Sand Calculator explained with worked examples
- Sand Calculator formula — how it actually works
- Common mistakes people make with the Sand Calculator
- Sand Calculator vs doing it by hand — which is faster?
- sand calculator — the complete guide
- How to get an accurate result from the Sand Calculator
- Sand Calculator for students — with examples
- Sand Calculator for homeowners and DIYers
Try the Sand Calculator — free, in your browser.