How to use the Drywall Calculator — step by step
Before you order a single sheet, you need two numbers: how many square metres of wall you have, and how many screws each sheet takes. The Drywall Calculator turns those numbers into a shopping list — sheets first, screws second — so you can walk into the yard knowing exactly what to ask for.
At a glance
Step 1: measure each wall
Measure the length of each wall and its height, then multiply the two. A room 4 metres long and 3 metres wide with a ceiling height of 2.7 metres has two long walls of 4 × 2.7 = 10.8 m² each, which is 21.6 m², and two short walls of 3 × 2.7 = 8.1 m² each, which is 16.2 m². Added together, that is 37.8 m² of wall.
Step 2: subtract the doors and windows
Drywall does not cover a door or a window, so take those areas off the total. A standard door of 0.9 × 2.1 metres is 1.89 m², and a window of 1.2 × 1.2 metres is 1.44 m². Together they are 3.33 m², so 37.8 − 3.33 = 34.47 m² of wall to cover.
Step 3: type the area into the tool
Type 34.47 into the wall area box. The tool works in square metres, so if you measured in feet, convert first: a 10 foot wall is 3.05 metres, not 10 metres. Check the number once before you move on, because every later answer follows from it.
Step 4: check the sheet size
The tool starts with 2.88 m² per sheet, which is a standard 1.2 × 2.4 metre sheet. If your sheets are a different size, change this box: a 1.2 × 2.7 metre sheet covers 3.24 m² and a 1.2 × 3.0 metre sheet covers 3.6 m². Leaving the wrong sheet size in is the quickest way to order the wrong number of sheets.
Step 5: read the sheets and the screws
The tool divides your area by the sheet area and rounds up: 34.47 ÷ 2.88 = 11.97, so 12 sheets. It then multiplies by the screws per sheet, which starts at 32: 12 × 32 = 384 screws. Twelve sheets cover 12 × 2.88 = 34.56 m², just enough for your 34.47 m² of wall.
Worked example
Take the room above: 37.8 m² of wall, minus a door and a window, leaves 34.47 m². The tool gives 12 sheets and 384 screws. If you had skipped step 2 and typed 37.8, it would have given 14 sheets and 448 screws — two extra sheets and 64 extra screws for wall that is not there.
The common mistake
People type the gross wall area and forget the openings. A door and a window in one room cost 3.33 m² here, which is more than a whole sheet. Measure the openings, subtract them, and only then type the number in.
Frequently asked questions
What do I measure first?
Each wall’s length and height. Multiply them to get square metres, add the walls together, then subtract doors and windows.
What sheet size does the tool assume?
A standard 1.2 m × 2.4 m sheet, which covers 2.88 m². Change the sheet area box if your sheets are a different size.
How many screws does it allow per sheet?
32 screws per sheet to start with. Change the figure if your fixing pattern uses more or fewer.
Can I use it for a ceiling too?
Yes. Measure the ceiling area just like a wall — length times width — and enter it in the same box.
More guides on the Drywall Calculator
- Drywall Calculator explained with worked examples
- Drywall Calculator formula — how it actually works
- Drywall Calculator for beginners — start here
- Common mistakes people make with the Drywall Calculator
- Drywall Calculator vs doing it by hand — which is faster?
- drywall calculator — the complete guide
- How to get an accurate result from the Drywall Calculator
- Drywall Calculator for students — with examples
- Drywall Calculator for homeowners and DIYers
Try the Drywall Calculator — free, in your browser.