Drywall Calculator formula — how it actually works
There is no hidden maths in the Drywall Calculator. It runs one division, rounds the answer up to a whole sheet, and then runs one multiplication for the screws. Once you can do those two steps on paper, you can check any answer the tool gives you.
Sheets = ceil(wall area ÷ area per sheet) Screws = sheets × screws per sheet Sheet area = 1.2 × 2.4 = 2.88 m²
At a glance
Step one: the sheet area
A standard sheet is 1.2 metres by 2.4 metres, so its area is 1.2 × 2.4 = 2.88 m². That number is the divisor in the formula, and it is the figure to change first if your sheets are a different size. A 1.2 × 2.7 metre sheet covers 3.24 m² and a 1.2 × 3.0 metre sheet covers 3.6 m².
Step two: divide and round up
Divide the wall area by the sheet area, then round up to the next whole number — mathematicians call this the ceiling. For a 40 m² wall with standard sheets: 40 ÷ 2.88 = 13.89, and the ceiling of 13.89 is 14 sheets. With longer 3.24 m² sheets the same wall needs 40 ÷ 3.24 = 12.35, so 13 sheets, and with 3.6 m² sheets it needs 40 ÷ 3.6 = 11.11, so 12 sheets.
Step three: the screws
Screws are sheets times screws per sheet, with 32 as the tool’s starting figure. For the 40 m² wall that is 14 × 32 = 448 screws with standard sheets, 13 × 32 = 416 screws with the 3.24 m² sheets, and 12 × 32 = 384 screws with the 3.6 m² sheets. Fewer, larger sheets means fewer screws as well as fewer sheets.
Worked example
Take a 30 m² wall: 30 ÷ 2.88 = 10.42, so 11 sheets, and 11 × 32 = 352 screws. Check it backwards: 11 sheets cover 11 × 2.88 = 31.68 m², which is more than 30 m², so the wall is covered. Ten sheets would cover only 28.8 m², which is short.
The common mistake
People divide the wall area by the sheet’s width instead of its area: 40 ÷ 1.2 = 33.33, which rounds up to 34 sheets — more than double the right answer of 14. Always divide by the full sheet area, 2.88 m² for a standard sheet, never by one side of it.
Frequently asked questions
What is the drywall formula?
Sheets = wall area ÷ area per sheet, rounded up to a whole sheet. Screws = sheets × screws per sheet.
What is the area of a standard drywall sheet?
2.88 m². A standard sheet is 1.2 m × 2.4 m, and 1.2 × 2.4 = 2.88.
How many sheets does 40 m² need with 3.6 m² sheets?
12 sheets. Divide 40 by 3.6 to get 11.11, round up to 12, then 12 × 32 = 384 screws.
Why does the formula round up instead of rounding to nearest?
Because a part sheet still has to be bought whole. Rounding down would leave part of the wall uncovered.
More guides on the Drywall Calculator
- How to use the Drywall Calculator — step by step
- Drywall Calculator explained with worked examples
- Drywall Calculator for beginners — start here
- Common mistakes people make with the Drywall Calculator
- Drywall Calculator vs doing it by hand — which is faster?
- drywall calculator — the complete guide
- How to get an accurate result from the Drywall Calculator
- Drywall Calculator for students — with examples
- Drywall Calculator for homeowners and DIYers
Try the Drywall Calculator — free, in your browser.