Drywall Calculator for homeowners and DIYers
Redoing a bedroom means drywall on four walls and a ceiling, and the order goes wrong in the same two places every time: the ceiling gets forgotten, and the door and window stay in the area. The Drywall Calculator handles the arithmetic, but you have to give it the full job, so this guide works through one bedroom from measuring to ordering.
At a glance
The bedroom, wall by wall
Take a bedroom 4 metres by 3.5 metres with a 2.7 metre ceiling. The two long walls are 4 × 2.7 = 10.8 m² each, so 21.6 m² together, and the two short walls are 3.5 × 2.7 = 9.45 m² each, so 18.9 m² together. That is 40.5 m² of wall before openings.
Subtract the door and the window
The bedroom has one door of 0.9 × 2.1 metres, which is 1.89 m², and one window of 1.2 × 1.2 metres, which is 1.44 m². Together they are 3.33 m², so the wall to cover is 40.5 − 3.33 = 37.17 m². Divide by the sheet area: 37.17 ÷ 2.88 = 12.91, so 13 sheets and 13 × 32 = 416 screws for the walls.
Do not forget the ceiling
The ceiling is 4 × 3.5 = 14 m², which needs 14 ÷ 2.88 = 4.86, so 5 sheets and 5 × 32 = 160 screws. Add it to the walls and the bedroom needs 13 + 5 = 18 sheets and 18 × 32 = 576 screws in total. Ordering only the 13 wall sheets would leave the whole ceiling undone.
Worked example: the full order
For this bedroom, the order is 18 sheets and 576 screws, covering 18 × 2.88 = 51.84 m² against 37.17 + 14 = 51.17 m² of surface — a spare 0.67 m². That is a tight margin on a real job, so add one or two spare sheets for miscuts, taking the order to 19 or 20 sheets and 608 or 640 screws.
The common mistake
Homeowners measure the walls, order the sheets, and only then remember the ceiling — or they measure the ceiling and forget that a sloped or bulkhead section adds area. Measure every surface you plan to cover before you type anything in, and run the walls and the ceiling as separate calculations so neither one hides inside the other.
Frequently asked questions
How many sheets does a 4 m by 3.5 m bedroom need?
18 sheets and 576 screws: 13 for the walls after subtracting the door and window, and 5 for the ceiling.
How do I subtract a door and a window?
Multiply each one’s length by its height — a door of 0.9 × 2.1 m is 1.89 m² — and take them off the wall total.
Should I add spare sheets for a bedroom?
Yes, one or two. Eighteen sheets cover 51.84 m² against 51.17 m² of surface, so one bad cut leaves you short.
Does the tool count joint compound?
No. It counts sheets and screws only, so budget for compound and tape separately.
More guides on the Drywall Calculator
- How to use the Drywall Calculator — step by step
- Drywall Calculator explained with worked examples
- Drywall Calculator formula — how it actually works
- Drywall Calculator for beginners — start here
- Common mistakes people make with the Drywall Calculator
- Drywall Calculator vs doing it by hand — which is faster?
- drywall calculator — the complete guide
- How to get an accurate result from the Drywall Calculator
- Drywall Calculator for students — with examples
Try the Drywall Calculator — free, in your browser.