← All blog posts

Drywall Calculator for beginners — start here

WhiteUI · A plain-English guide to the Drywall Calculator

If you have never hung drywall, the numbers look harder than they are. You need one measurement skill — length times height — and one idea: a sheet covers 2.88 square metres. The Drywall Calculator does the rest, and this guide walks through your first wall with it.

At a glance

8.1 m² wall on a 0 to 20 m² scale0 m²10 m²20 m²8.1 m² = 3 sheets and 96 screws
An 8.1 square metre wall sits less than halfway along a 0 to 20 square metre scale.

Your first wall

Pick one wall and measure it. Say it is 3 metres long and 2.7 metres high: 3 × 2.7 = 8.1 m². Type 8.1 into the wall area box and leave the sheet size at 2.88 m². The tool divides 8.1 by 2.88 to get 2.81, rounds up to 3 sheets, and multiplies 3 × 32 to give 96 screws. Three sheets cover 3 × 2.88 = 8.64 m², so your 8.1 m² wall is covered with a little to spare.

Then try a ceiling

A ceiling works exactly the same way: measure length times width instead of length times height. A ceiling 3 metres by 4 metres is 12 m², and 12 ÷ 2.88 = 4.17, so 5 sheets and 5 × 32 = 160 screws. The tool does not care whether the surface is upright or overhead; area is area.

Putting two surfaces together

If you type the wall and the ceiling in together, 8.1 + 12 = 20.1 m², the tool gives 20.1 ÷ 2.88 = 6.98, so 7 sheets and 224 screws. Entered separately they come to 3 + 5 = 8 sheets. The one-sheet gap is offcuts: the area method assumes a piece cut from the wall can finish the ceiling. If your cuts will not line up that neatly, run each surface separately and add the sheets.

Worked example

A beginner’s practice wall, 2.4 metres long and 2.7 metres high, is 6.48 m². Divide by 2.88 to get 2.25, round up to 3 sheets, and count 3 × 32 = 96 screws. Two sheets would cover only 5.76 m², so three is the smallest number that does the job.

The common mistake

Beginners type the wall’s length instead of its area. For the 3 metre wall above, typing 3 gives 3 ÷ 2.88 = 1.04, so 2 sheets — but the wall is 8.1 m² and needs 3. Always multiply length by height first, then type the area in.

Frequently asked questions

What is the first number I need?

The wall’s area in square metres: length times height. A 3 m wall that is 2.7 m high is 8.1 m².

How big is one sheet of drywall?

A standard sheet is 1.2 m × 2.4 m, which covers 2.88 m².

How many screws go in each sheet?

32 screws per sheet is the tool’s starting figure. A 3-sheet wall needs 3 × 32 = 96 screws.

Do ceilings use the same calculation?

Yes. Measure the ceiling’s length times its width and enter the area in the same box.

More guides on the Drywall Calculator

Try it yourself

Try the Drywall Calculator — free, in your browser.

Open the Drywall Calculator