Drywall Calculator explained with worked examples
The Drywall Calculator does two sums and nothing else, which is why it is easy to check. First it works out how many sheets cover your wall area, rounding up to a whole sheet. Then it multiplies the sheets by the screws each sheet needs. Everything below follows from those two steps.
At a glance
Example 1: a 12 m² wall
A small wall of 3 metres by 4 metres is 12 m². Divide by the sheet area: 12 ÷ 2.88 = 4.17, which rounds up to 5 sheets. Five sheets at 32 screws each is 5 × 32 = 160 screws, and they cover 5 × 2.88 = 14.4 m², so there is 2.4 m² of spare board for cuts.
Example 2: a 40 m² wall
This is the tool’s own worked example. Divide 40 by 2.88 to get 13.89, which rounds up to 14 sheets. Fourteen sheets at 32 screws each is 14 × 32 = 448 screws, and they cover 14 × 2.88 = 40.32 m² — only 0.32 m² more than the wall, so there is almost no spare board here.
Example 3: a 60 m² wall
A larger job of 60 m² divides as 60 ÷ 2.88 = 20.83, which rounds up to 21 sheets. Twenty-one sheets at 32 screws each is 21 × 32 = 672 screws, and they cover 21 × 2.88 = 60.48 m², leaving 0.48 m² spare.
Why the answer always rounds up
You cannot buy 13.89 sheets, and 13 sheets would only cover 13 × 2.88 = 37.44 m², leaving 2.56 m² of a 40 m² wall bare. Rounding up to 14 is not padding, it is the only whole number of sheets that covers the wall. The same rule applies to every example above.
The common mistake
People round the division to the nearest whole number instead of rounding up. For the 40 m² wall, 13.89 rounds to 14 by luck, but for a 36 m² wall the division is 36 ÷ 2.88 = 12.5, and rounding to the nearest gives 12 or 13 depending on habit. The right answer is 13 sheets either way, because 12 sheets cover only 34.56 m². Always round up.
Frequently asked questions
How many sheets do I need for 12 m²?
5 sheets. Divide 12 by 2.88 to get 4.17, round up to 5, and allow 5 × 32 = 160 screws.
How many sheets do I need for 40 m²?
14 sheets and 448 screws. Divide 40 by 2.88 to get 13.89, round up to 14, then 14 × 32 = 448.
How many sheets do I need for 60 m²?
21 sheets and 672 screws. Divide 60 by 2.88 to get 20.83, round up to 21, then 21 × 32 = 672.
Why is the sheet count never a decimal?
Sheets are sold whole, so the tool rounds the division up. A decimal answer would leave part of the wall uncovered.
More guides on the Drywall Calculator
- How to use the Drywall Calculator — step by step
- Drywall Calculator formula — how it actually works
- Drywall Calculator for beginners — start here
- Common mistakes people make with the Drywall Calculator
- Drywall Calculator vs doing it by hand — which is faster?
- drywall calculator — the complete guide
- How to get an accurate result from the Drywall Calculator
- Drywall Calculator for students — with examples
- Drywall Calculator for homeowners and DIYers
Try the Drywall Calculator — free, in your browser.