How to use the Brick Calculator — step by step
Counting bricks for a wall takes five steps and about a minute once the wall is measured. The Brick Calculator does the multiplying for you: type the wall area, check the bricks-per-square-metre figure, and it gives you the brick count with 10% waste added, plus a rough mortar guide.
At a glance
Step 1: measure the wall
Measure the wall’s length and height in metres, then multiply them. A wall 5 metres long and 4 metres high is 5 × 4 = 20 m². Measure the finished wall face, not the room floor, and measure each wall separately if they are different sizes.
Step 2: subtract openings
Work out the area of any door or window in the wall and take it off the total. A door 2 metres high and 0.9 metres wide is 2 × 0.9 = 1.8 m², so a 20 m² wall with that door becomes 20 − 1.8 = 18.2 m². Skip this step and you will order bricks for wall that is not there.
Step 3: type the wall area
Type your wall area into the “Wall area” box. For the walk-through, type 20. The slider under the box does the same job if you prefer to drag it. The answer updates as you type, so there is no button to press.
Step 4: check bricks per square metre
The second box, “Bricks per square metre”, starts at 60. That is the common figure for a standard brick laid with a 10 mm mortar joint in a single skin. Leave it at 60 unless your brick is a different size — the tool page explains that a different brick size or joint changes the figure.
Step 5: read the answer
The result panel shows the brick count straight away. For 20 m² at 60 bricks per square metre the answer is 1,320 bricks: 20 × 60 = 1,200 before waste, and 1,200 × 1.10 = 1,320 with the 10% allowance. Underneath, the mortar guide says about 14 bags, because the guide is one bag per 100 bricks and 1,320 ÷ 100 = 13.2, rounded up to 14.
Worked example
A garden wall 4 metres long and 3 metres high is 4 × 3 = 12 m². At 60 bricks per square metre that is 12 × 60 = 720 bricks before waste, and 720 × 1.10 = 792 bricks with waste. The mortar guide is ceil(792 ÷ 100) = 8 bags. Type 12 and 60 into the tool and check that your answer matches.
The common mistake
People type the wall’s length instead of its area. A wall 5 metres long and 2.4 metres high is 5 × 2.4 = 12 m², not 5 m². Typing 5 gives 5 × 60 × 1.10 = 330 bricks, while the wall really needs 792 — a shortfall of 462 bricks. Always multiply length by height before you type anything in.
Frequently asked questions
What do I type into the Brick Calculator first?
The wall area in square metres — the wall’s length multiplied by its height, with doors and windows taken off.
What is bricks per square metre?
How many bricks cover one square metre of wall. The tool starts at 60, the common figure for a standard brick with a 10 mm mortar joint in a single skin.
How many mortar bags will I need?
The guide is one bag per 100 bricks. For 1,320 bricks that is 13.2, rounded up to 14 bags. It is a rough planning figure, so confirm with your supplier.
Does the tool count a double-skin wall?
No. A double-skin (cavity) wall needs roughly twice the bricks, so double the wall area or run the calculator once per skin.
More guides on the Brick Calculator
- Brick Calculator explained with worked examples
- Brick Calculator formula — how it actually works
- Brick Calculator for beginners — start here
- Common mistakes people make with the Brick Calculator
- Brick Calculator vs doing it by hand — which is faster?
- brick calculator — the complete guide
- How to get an accurate result from the Brick Calculator
- Brick Calculator for students — with examples
- Brick Calculator for homeowners and DIYers
Try the Brick Calculator — free, in your browser.