How to get an accurate result from the Brick Calculator
An accurate brick count comes from three habits: measure the wall carefully, subtract the openings, and check the answer by working it backwards. The Brick Calculator already uses the exact formula, so most accuracy problems come from what is typed in, not from the tool.
At a glance
Measure twice, in metres
Measure the wall’s length and height twice and use metres throughout. A wall 4 metres long and 2.5 metres high is 4 × 2.5 = 10 m². A tape that sags or a guessed height can easily put the area out by half a square metre, which is 33 bricks at 60 per square metre with waste (0.5 × 60 × 1.10 = 33).
Worked example: a wall with a window
Take that 10 m² wall with a window of 1.2 m². The brickwork area is 10 − 1.2 = 8.8 m². The bare count is 8.8 × 60 = 528 bricks, and with 10% waste it is 528 × 1.10 = 580.8, rounded up to 581 bricks. The mortar guide is ceil(581 ÷ 100) = 6 bags.
Use the right bricks per square metre
The tool starts at 60, the common figure for a standard brick with a 10 mm joint. If your brick is smaller and the figure should be 75, a 10 m² wall needs 10 × 75 × 1.10 = 825 bricks, not 660. That 165-brick gap is the whole cost of using the wrong figure, so check it against your brick size before you order.
Check the answer backwards
Divide the answer by 1.10 and you should land back on the bare count. For the wall above: 581 ÷ 1.10 = 528.18, which is 528 allowing for the round-up — the check passes. If dividing back gives a number far from your bare count, an input is wrong. Also do a rough range check: 10 m² of single-skin wall is about 660 bricks, so an answer of 6,000 for a 10 m² wall means a unit is wrong.
Match the count to the job
Whole bricks are the only precision that matters — the tool rounds up, and you order whole bricks. For a small garden wall, being 10 bricks out is a small top-up; for a 40 m² wall, a 1 m² measuring error is 66 bricks (1 × 60 × 1.10 = 66), so measure the big walls twice.
The common mistake
People measure in feet and type the number in as metres. A wall 13 feet long and 8 feet high is 13 × 8 = 104 square feet, which is 104 × 0.0929 = 9.66 m². Typed as 104 m², the tool gives 104 × 60 × 1.10 = 6,864 bricks; the real count is 9.66 × 60 × 1.10 = 637.56, rounded up to 638 bricks. Convert square feet to square metres first — multiply by 0.0929 — or measure in metres from the start.
Frequently asked questions
How many bricks do I need for an 8.8 m² wall?
581 bricks at 60 per square metre: 8.8 × 60 = 528, plus 10% waste gives 580.8, rounded up to 581. The mortar guide is 6 bags.
How do I check my brick count?
Divide the answer by 1.10. It should land back on your bare count: 581 ÷ 1.10 = 528.18, which is 528 allowing for the round-up.
What if I measured the wall in feet?
Convert square feet to square metres first: multiply by 0.0929. A 104 sq ft wall is 9.66 m², not 104 m².
Why does the tool round the answer up?
You cannot buy part of a brick, and rounding down would leave you short. A result of 580.8 is reported as 581 bricks.
More guides on the Brick Calculator
- How to use the Brick Calculator — step by step
- Brick Calculator explained with worked examples
- Brick Calculator formula — how it actually works
- Brick Calculator for beginners — start here
- Common mistakes people make with the Brick Calculator
- Brick Calculator vs doing it by hand — which is faster?
- brick calculator — the complete guide
- Brick Calculator for students — with examples
- Brick Calculator for homeowners and DIYers
Try the Brick Calculator — free, in your browser.