brick calculator — the complete guide
A brick count answers one question: how many bricks does this wall need? This guide covers everything the Brick Calculator asks for, what each number means, and the cases that catch people out — openings, double skins, and the wrong bricks-per-square-metre figure.
At a glance
The two inputs
The tool asks for two numbers. Wall area, in square metres, is the wall’s length multiplied by its height, with doors and windows taken off. Bricks per square metre is how many bricks cover one square metre of wall — the tool starts at 60, the common figure for a standard brick with a 10 mm mortar joint in a single skin, and the slider runs from 20 to 120 for other brick sizes.
The formula
Bricks = ceil(wall area × bricks per m² × 1.10). The 1.10 adds 10% for cuts at openings and corners and for bricks that break in transport and handling. Ceil rounds the result up to a whole brick, because you cannot buy part of one. The mortar guide is ceil(bricks ÷ 100) — one bag per 100 bricks, rounded up, as a rough planning figure.
Openings: subtract them first
Measure each door and window, work out its area, and take it off the wall area before you type anything in. A door of 1.8 m² and a window of 2 m² together take 3.8 m² off a wall: on a 25 m² wall that leaves 21.2 m² of brickwork, which needs 21.2 × 60 × 1.10 = 1,399.2, rounded up to 1,400 bricks, instead of the 1,650 bricks the gross area would give. That is 250 bricks saved.
Double-skin walls
A cavity wall has two skins of brick, so it needs roughly twice the bricks. The tool counts one skin, so double the wall area before you type it in, or run the calculator once per skin. Worked example: a 25 m² double-skin wall is counted as 50 m², which gives 50 × 60 = 3,000 bricks before waste and 3,000 × 1.10 = 3,300 bricks with waste. The mortar guide is ceil(3,300 ÷ 100) = 33 bags.
Buying and budgeting
Order in one batch where you can, so the bricks come from the same batch and match in colour. At ₹8 a brick, the 25 m² double-skin wall above costs 3,300 × 8 = ₹26,400 for bricks, plus 33 bags of mortar. Check the count against the size of the job before you pay: 10 m² of single-skin wall is about 660 bricks, so if your answer for a 10 m² wall is far from 660, an input is wrong.
The common mistake
People count the gross wall area and forget the openings. On the 25 m² wall above, counting the gross area gives 1,650 bricks instead of the correct 1,400 — 250 bricks too many, which at ₹8 each is ₹2,000 of brick sitting unused. Subtract every opening first, then let the tool do the multiplying.
Frequently asked questions
How many bricks are there per square metre?
60 is the common figure for a standard brick with a 10 mm mortar joint in a single skin. Change the figure if your brick size or joint differs.
How do I count a double-skin wall?
Double the wall area before you type it in, or run the calculator once per skin. A 25 m² double-skin wall is counted as 50 m², giving 3,300 bricks.
How many mortar bags do I need?
About one bag per 100 bricks, rounded up. For 3,300 bricks that is 33 bags. It is a rough guide, so confirm with your supplier.
Should I subtract windows and doors?
Yes. Measure each opening, work out its area, and take it off the wall area. A 1.8 m² door saves about 119 bricks.
How many bricks do I need for a 25 m² double-skin wall?
3,300 bricks: 50 m² counted × 60 bricks per square metre × 1.10 waste allowance.
More guides on the Brick Calculator
- How to use the Brick Calculator — step by step
- Brick Calculator explained with worked examples
- Brick Calculator formula — how it actually works
- Brick Calculator for beginners — start here
- Common mistakes people make with the Brick Calculator
- Brick Calculator vs doing it by hand — which is faster?
- How to get an accurate result from the Brick Calculator
- Brick Calculator for students — with examples
- Brick Calculator for homeowners and DIYers
Try the Brick Calculator — free, in your browser.