Brick Calculator for beginners — start here
If you have never counted bricks before, there are only three ideas to learn: wall area is length times height, 60 bricks cover one square metre of a standard single-skin wall, and you add 10% for cuts and breakage. The Brick Calculator handles the multiplying, so your job is to measure well and type the right numbers in.
At a glance
Start by measuring the wall
Take a tape measure and measure the wall’s length along the ground and its height from floor to top, both in metres. Multiply them: a wall 3 metres long and 2 metres high is 3 × 2 = 6 m². That one number, the wall area, is the main thing the tool needs.
What 60 bricks per square metre means
Picture one square metre of wall — a square one metre on each side. Laid with a 10 mm mortar joint, about 60 standard bricks fill that square. So a 6 m² wall needs about 6 × 60 = 360 bricks before waste. The tool starts at 60 because that is the common figure; if your brick is a different size, the number changes, but the idea is the same.
Try one yourself
Take that 6 m² wall. Type 6 into the wall area box and leave bricks per square metre at 60. The tool gives 396 bricks: 6 × 60 = 360, and 360 × 1.10 = 396. The mortar guide says 4 bags, because 396 ÷ 100 = 3.96, rounded up to 4. Type the same numbers in and check your answer matches.
What the 10% is for
Bricks get cut to fit around corners and openings, and a few break on the way to site. The 10% covers both. On a small 6 m² wall it adds only 36 bricks, but skipping it still leaves a gap at the end of the wall — better to have a few bricks left over than to run short.
The common mistake
Beginners often measure the wall but forget to subtract a window or door. A 6 m² wall with a 1 m² window is really 5 m² of brickwork: 5 × 60 × 1.10 = 330 bricks, not 396. That is 66 bricks too many — not a disaster, but money spent on bricks that will sit unused. Measure the opening, work out its area, and take it off the wall area first.
Frequently asked questions
How do I measure a wall for the Brick Calculator?
Measure the length and the height in metres and multiply them. A wall 3 metres long and 2 metres high is 6 m².
How many bricks do I need for a 6 m² wall?
396 bricks at 60 per square metre: 6 × 60 = 360, plus 10% waste gives 396. The mortar guide is 4 bags.
What is the 10% waste for?
Bricks cut at openings and corners, and bricks that break in transport and handling. The tool adds it automatically.
How many mortar bags do I need for 396 bricks?
4 bags. The guide is one bag per 100 bricks, and 396 ÷ 100 = 3.96, rounded up to 4.
More guides on the Brick Calculator
- How to use the Brick Calculator — step by step
- Brick Calculator explained with worked examples
- Brick Calculator formula — how it actually works
- Common mistakes people make with the Brick Calculator
- Brick Calculator vs doing it by hand — which is faster?
- brick calculator — the complete guide
- How to get an accurate result from the Brick Calculator
- Brick Calculator for students — with examples
- Brick Calculator for homeowners and DIYers
Try the Brick Calculator — free, in your browser.