Brick Calculator formula — how it actually works
Every answer on the Brick Calculator comes from one short formula, plus a mortar guide. There is no hidden step and no separate formula for different walls — the same line handles a garden wall and a house wall alike.
Bricks = ceil(wall area × bricks per m² × 1.10) Mortar bags = ceil(bricks ÷ 100)
At a glance
Where 60 bricks per square metre comes from
The tool’s default of 60 is the common figure for a standard brick laid with a 10 mm mortar joint in a single skin. The joint takes up space, so fewer bricks fit in a square metre than if they were laid dry. A different brick size or a different joint changes the figure, which is why the tool lets you change it — the slider runs from 20 to 120 bricks per square metre. If your brick works out at 50 per square metre, type 50; the formula does the rest.
Worked example: 20 m² at 60 per square metre
Step one, the bare count: 20 × 60 = 1,200 bricks. Step two, the waste allowance: 1,200 × 1.10 = 1,320 bricks. Step three, the mortar guide: 1,320 ÷ 100 = 13.2, and ceil rounds that up to 14 bags. The tool shows exactly these three numbers: 1,200 before waste, 1,320 with waste, and about 14 bags.
Why the answer rounds up
Ceil means “round up to the next whole number”. A wall of 10.2 m² at 60 per square metre gives 10.2 × 60 × 1.10 = 673.2, which the tool reports as 674 bricks. You cannot buy 0.2 of a brick, and rounding down would leave you short, so the tool always rounds up.
Why multiply by 1.10
The 1.10 is the 10% waste allowance: bricks cut at openings and corners, plus bricks that break in transport and handling. It is applied after the bare count, so the waste grows with the wall — 120 extra bricks on a 20 m² wall, but only 36 on a 6 m² wall (360 × 1.10 = 396).
The common mistake
People use the wrong bricks-per-square-metre figure and never notice. If your brick really needs 60 per square metre but you leave the box at 50, a 20 m² wall comes out as 20 × 50 × 1.10 = 1,100 bricks instead of 1,320 — 220 bricks short, which is about 3.7 m² of wall left unbuilt. Check the figure against your brick size before you trust the answer.
Frequently asked questions
What is the Brick Calculator formula?
Bricks = ceil(wall area × bricks per square metre × 1.10). The 1.10 adds 10% for cuts and breakage, and ceil rounds up to a whole brick.
Where does 60 bricks per square metre come from?
It is the common figure for a standard brick laid with a 10 mm mortar joint in a single skin. A different brick size or joint changes it, so adjust the figure if yours differs.
Why does the answer round up?
You cannot buy part of a brick, and rounding down would leave you short. A result of 673.2 is reported as 674 bricks.
How are mortar bags worked out?
One bag per 100 bricks, rounded up: ceil(bricks ÷ 100). For 1,320 bricks that is 14 bags. It is a rough planning guide only.
More guides on the Brick Calculator
- How to use the Brick Calculator — step by step
- Brick Calculator explained with worked examples
- Brick Calculator for beginners — start here
- Common mistakes people make with the Brick Calculator
- Brick Calculator vs doing it by hand — which is faster?
- brick calculator — the complete guide
- How to get an accurate result from the Brick Calculator
- Brick Calculator for students — with examples
- Brick Calculator for homeowners and DIYers
Try the Brick Calculator — free, in your browser.