Common mistakes people make with the Brick Calculator
Most wrong brick counts are not arithmetic slips. They are input slips: the wrong area typed in, an opening forgotten, or a wall counted once when it has two skins. The Brick Calculator gives the right answer when the inputs are right, so the skill is checking what you typed before you trust the number.
At a glance
Mistake 1: forgetting openings
A door 2 metres high and 0.9 metres wide is 1.8 m² of wall that will never be bricked. At 60 bricks per square metre with 10% waste, that opening is worth 1.8 × 60 × 1.10 = 118.8, so about 119 bricks. Forgetting it means ordering 119 bricks you do not need.
Mistake 2: forgetting the waste
The tool adds 10% waste, but only if you read the right line. A 20 m² wall needs 1,200 bricks before waste and 1,320 with waste. Ordering the bare 1,200 leaves you 120 bricks short — roughly 2 m² of wall unbuilt — and a second delivery for the top-up.
Mistake 3: the wrong bricks per square metre
Leaving the figure at 50 when your brick needs 60 gives 20 × 50 × 1.10 = 1,100 bricks for a 20 m² wall, instead of the correct 1,320. That is 220 bricks short. The tool’s default of 60 fits a standard brick with a 10 mm joint; if your brick is a different size, change the figure to match it.
Mistake 4: typing length instead of area
A wall 5 metres long and 2.4 metres high is 5 × 2.4 = 12 m². Typing 5 into the wall area box gives 5 × 60 × 1.10 = 330 bricks, while the wall really needs 12 × 60 × 1.10 = 792 — a shortfall of 462 bricks, more than half the wall. Always multiply length by height first.
Mistake 5: one skin for a double-skin wall
A double-skin (cavity) wall has two layers of brick. Counting a 15 m² double-skin wall once gives 15 × 60 × 1.10 = 990 bricks, but the wall really needs 1,980 — double the count, because there are two skins to build. Double the wall area, or run the calculator once per skin.
Worked check
Take a 12 m² wall with a door of 1.8 m². The brickwork area is 12 − 1.8 = 10.2 m². At 60 per square metre that is 10.2 × 60 = 612 bricks before waste, and 612 × 1.10 = 673.2, rounded up to 674 bricks. The mortar guide is ceil(674 ÷ 100) = 7 bags. If your count for that wall is far from 674, one of the five mistakes above is the likely cause.
Frequently asked questions
What is the most common brick-counting mistake?
Typing the wall’s length instead of its area, or forgetting to subtract doors and windows. Both give a count that is far from the real one.
How many bricks does a door opening save?
A door of 1.8 m² saves about 119 bricks at 60 per square metre with 10% waste (1.8 × 60 × 1.10 = 118.8).
Why is my brick count 10% short?
You probably ordered the “before waste” figure. The tool adds 10% for cuts and breakage — on a 20 m² wall that is 120 extra bricks.
Does the tool count double-skin walls?
No. It counts one skin. Double the wall area, or run the calculator once per skin, for a cavity wall.
More guides on the Brick Calculator
- How to use the Brick Calculator — step by step
- Brick Calculator explained with worked examples
- Brick Calculator formula — how it actually works
- Brick Calculator for beginners — start here
- Brick Calculator vs doing it by hand — which is faster?
- brick calculator — the complete guide
- How to get an accurate result from the Brick Calculator
- Brick Calculator for students — with examples
- Brick Calculator for homeowners and DIYers
Try the Brick Calculator — free, in your browser.