← All blog posts

How to use a dilution calculator

WhiteUI · A plain-English guide to the Dilution Calculator

A dilution calculator does one job: it works out how much stock solution to take and how much water to add, so a target strength is reached. The Dilution Calculator opens with a stock of 10 M, a target of 1 M and a final volume of 1 L, and the big number already reads 0.1 L of stock, since 1 × 1 ÷ 10 = 0.1.

Bar diagram comparing 0.1 litres of stock with 0.9 litres of water for the calculator default dilution
In plain words: the tool opens on 10 M stock, 1 M target and 1 litre final volume. It reads 0.1 L of stock, and the rest of the litre is 0.9 L of water.

Step 1: read the starting answer

Before you change anything, look at what the tool already shows. The stock box reads 10 M, the target box reads 1 M, the final volume box reads 1 L, and the big number reads 0.1 L of stock, with the line underneath reading “Stock: 0.1 L · Water to add: 0.9 L”.

Step 2: set the stock concentration

Click the stock box and type the strength of the bottle on your shelf, in M, or drag the slider underneath it. For the example in this page, set the stock to 2 M.

Step 3: set the target and the final volume

For this example, set the target to 0.5 M. Then click the final volume box and type how much diluted solution you need, in litres, or drag its slider, which runs from 0 to 10 L. For this example, 250 mL is 0.25 L, so type 0.25.

Step 4: read the stock volume and the water

The big number is the stock volume in litres. With 2 M stock, a 0.5 M target and 0.25 L final volume, it reads 0.0625 L, because 0.5 × 0.25 ÷ 2 = 0.0625, which is 62.5 mL. The line underneath reads “Stock: 0.0625 L · Water to add: 0.1875 L”, and 0.1875 L is 187.5 mL.

Step 5: check the answer makes sense

Before you use the number, check it against what you know. The stock volume must be smaller than the final volume, and smaller when the stock is stronger. Here 0.0625 L is a quarter of 0.25 L, which fits, because the stock is four times stronger than the target: 2 ÷ 0.5 = 4. The stock and the water must add up to the final volume: 0.0625 + 0.1875 = 0.25 L. And the check sum should multiply out: 2 × 0.0625 = 0.125 and 0.5 × 0.25 = 0.125.

The common mistake

The mistake people make with this tool is typing the final volume in millilitres. The volume box takes litres, so 250 mL goes in as 0.25, not 250. Type 250 and the tool works out the stock for 250 litres, giving 62.5 litres of stock, which is a thousand times too much.

Frequently asked questions

How do I use the Dilution Calculator?

Type the stock concentration in M, the target concentration in M, and the final volume in litres. The stock volume appears at once; the starting numbers, 10 M to 1 M in 1 L, already give 0.1 L.

What do I type for 250 millilitres?

0.25, because the volume box takes litres. 250 mL is 0.25 L, and 0.5 × 0.25 ÷ 2 = 0.0625 L of stock, which is 62.5 mL.

What if the target is stronger than the stock?

The tool says so instead of showing a volume. Dilution only makes a solution weaker, so you need a stronger stock.

How do I read the answer in millilitres?

Multiply litres by 1,000. A stock volume of 0.0625 L is 62.5 mL, and 0.1875 L of water is 187.5 mL.

More guides on the Dilution Calculator

Try it yourself

Try the Dilution Calculator — free, in your browser.

Open the Dilution Calculator