How to calculate dilution
Dilution is making a solution weaker by adding more liquid, usually water. Nothing is taken out: the amount of dissolved chemical stays exactly the same, and it is spread through a bigger volume, so the concentration falls. The Dilution Calculator answers that question.
Step 1: write down the stock and the target
Every dilution needs three numbers. The stock concentration, written C1, is the strength of the bottle you start with, for example 2 M. The target concentration, written C2, is the strength you want, for example 0.5 M. The final volume, written V2, is how much diluted solution you need, for example 250 mL.
Step 2: work out the stock volume
The stock volume you need, written V1, comes from one formula: V1 = C2 × V2 ÷ C1. With the numbers above, that is V1 = 0.5 × 250 ÷ 2 = 62.5 mL.
Step 3: top up with water
The water to add is the final volume minus the stock volume: water = V2 − V1. Here that is 250 − 62.5 = 187.5 mL.
Worked example
Suppose you need 1 litre of 1 M solution and your stock is 10 M. Step 1 gives C1 = 10 M, C2 = 1 M and V2 = 1 L. Step 2 gives V1 = 1 × 1 ÷ 10 = 0.1 L, which is 100 mL of stock. Step 3 gives water = 1 − 0.1 = 0.9 L, which is 900 mL. So you measure 100 mL of the 10 M stock and add 900 mL of water to make 1 litre of 1 M solution. A second example, in millilitres throughout: to make 100 mL of 0.1 M from a 1 M stock, V1 = 0.1 × 100 ÷ 1 = 10 mL of stock, and the water is 100 − 10 = 90 mL.
The common mistake
The most common mistake is adding the full final volume of water instead of topping up. Take the first example: 62.5 mL of 2 M stock plus a full 250 mL of water gives 312.5 mL in total, and the concentration is 2 × 62.5 ÷ 312.5 = 0.4 M, not the 0.5 M you wanted. The second most common mistake is mixing up millilitres and litres in the same sum: 250 mL is 0.25 L, so if the final volume is entered as 250 and the concentrations are in M, the answer is in millilitres, and if it is entered as 0.25, the answer is in litres.
Frequently asked questions
How do I calculate a dilution?
Work out the stock volume with V1 = C2 × V2 ÷ C1, then add water until the total reaches V2. For 250 mL of 0.5 M from 2 M stock, that is 0.5 × 250 ÷ 2 = 62.5 mL of stock and 187.5 mL of water.
What is C1V1 = C2V2?
The dilution formula. C1 and V1 are the stock concentration and volume, C2 and V2 are the target concentration and final volume. It works because dilution does not change the amount of solute, only the volume around it.
How much water do I add when diluting?
The final volume minus the stock volume: water = V2 − V1. For 250 mL of 0.5 M from 2 M stock, that is 250 − 62.5 = 187.5 mL.
Can I dilute to a stronger concentration?
No. Dilution only makes a solution weaker. If the target is stronger than the stock, you need a stronger stock or a different method.
More guides on the Dilution Calculator
- Dilution formula explained simply
- Dilution: worked example step by step
- Dilution for beginners
- Common mistakes when calculating dilution
- Dilution vs molarity: what’s the difference
- How to use a dilution calculator
- Dilution quick reference table
- Dilution in real life: everyday examples
- Dilution practice questions with answers
Try the Dilution Calculator — free, in your browser.