Dilution quick reference table
Sometimes you do not need a worked example, only the number. This page is a table of the dilutions that come up most often: what a 1 M stock gives at common volumes, how much stock different strengths need for the same target, and what each dilution factor means. Every figure in the tables below was worked out from C1V1 = C2V2.
One molar stock, made up to 100 mL
One millilitre of stock gives 0.01 M, 5 mL gives 0.05 M, 10 mL gives 0.1 M, 20 mL gives 0.2 M, 25 mL gives 0.25 M, and 50 mL gives 0.5 M. The water in each case is 100 mL minus the stock: 99 mL, 95 mL, 90 mL, 80 mL, 75 mL and 50 mL.
Making 250 mL of 0.5 M from different stocks
| Stock | Stock volume | Water to add |
|---|---|---|
| 1 M | 125 mL | 125 mL |
| 2 M | 62.5 mL | 187.5 mL |
| 5 M | 25 mL | 225 mL |
| 10 M | 12.5 mL | 237.5 mL |
Read a row from left to right: the stock volume times the stock concentration equals 0.5 × 250 = 125 in every row, which is the check that each row is right. The water is 250 mL minus the stock in each row.
Dilution factors
| Dilution | Stock : water | Strength left |
|---|---|---|
| 1:2 | 1 : 1 | One half |
| 1:4 | 1 : 3 | One quarter |
| 1:5 | 1 : 4 | One fifth |
| 1:10 | 1 : 9 | One tenth |
| 1:100 | 1 : 99 | One hundredth |
The first number is the parts of stock and the second number is the total parts, so a 1:10 dilution is 1 part stock and 9 parts water, and the strength left is one tenth. A 2 M stock diluted 1:4 becomes 0.5 M, and a 5 M stock diluted 1:5 becomes 1 M.
Working the formula backwards
The final concentration is C2 = C1 × V1 ÷ V2: 5 mL of 6 M stock made up to 100 mL gives 0.3 M, 20 mL of 0.5 M stock made up to 200 mL gives 0.05 M, and 2 mL of 10 M stock made up to 50 mL gives 0.4 M. The final volume is V2 = C1 × V1 ÷ C2: 10 mL of 2 M stock diluted to 0.5 M makes 40 mL, and 25 mL of 4 M stock diluted to 0.4 M makes 250 mL.
The common mistake
The mistake with tables is reading the wrong row, or the wrong column, and then trusting the number because it came from a table. A 1 M stock made up to 100 mL with 10 mL of stock gives 0.1 M, but the same 10 mL of stock made up to 50 mL gives 0.2 M, and the two numbers answer different questions.
Frequently asked questions
What does 10 mL of 1 M stock give in 100 mL?
0.1 M, because 1 × 10 ÷ 100 = 0.1. The water is 100 − 10 = 90 mL.
How much 2 M stock do I need for 250 mL of 0.5 M?
62.5 mL of stock and 187.5 mL of water, because 0.5 × 250 ÷ 2 = 62.5.
What is left after a 1:10 dilution?
One tenth of the strength. A 1 M stock becomes 0.1 M, and a 2 M stock becomes 0.2 M.
How do I find the final concentration?
Use C2 = C1 × V1 ÷ V2. 5 mL of 6 M stock made up to 100 mL gives 6 × 5 ÷ 100 = 0.3 M.
More guides on the Dilution Calculator
- How to calculate dilution
- Dilution formula explained simply
- Dilution: worked example step by step
- Dilution for beginners
- Common mistakes when calculating dilution
- Dilution vs molarity: what’s the difference
- How to use a dilution calculator
- Dilution in real life: everyday examples
- Dilution practice questions with answers
Try the Dilution Calculator — free, in your browser.