← All blog posts

Dilution vs molarity: what’s the difference

WhiteUI · A plain-English guide to the Dilution Calculator

Dilution and molarity are easy to mix up, because every dilution changes a molarity. They are not the same thing. Molarity is a measurement: how strong a solution is, in moles per litre. Dilution is an action: adding solvent to make a solution weaker. The Dilution Calculator works with both ideas at once: you give it two molarities, the stock and the target, and it works out the dilution that connects them.

Bar diagram comparing 0.5 molar solution in 1 litre with 0.25 molar solution in 2 litres, both holding 0.5 moles
In plain words: the same 0.5 mol of solute in 1 litre is 0.5 M, and in 2 litres it is 0.25 M. Dilution changed the molarity, not the amount of solute.

Molarity is a measurement

Molarity, written M, is the number of moles of solute in each litre of solution. A 1 M solution holds 1 mole in every litre, a 0.5 M solution holds 0.5 moles in every litre, and a 2 M solution holds 2 moles in every litre. A solution made by dissolving 0.5 mol of salt in 1 litre of water is 0.5 ÷ 1 = 0.5 M, and the same 0.5 mol dissolved in 0.5 litres is 0.5 ÷ 0.5 = 1 M.

Dilution is an action

Dilution is what you do: you take a solution and add solvent, usually water, to make it weaker. A tenfold dilution grows the volume ten times and drops the molarity ten times: 1 M becomes 0.1 M. A twofold dilution halves the molarity: 1 M becomes 0.5 M.

What dilution changes and what it does not

Dilution changes the molarity and the volume, and it leaves the amount of solute alone. Take 1 litre of 0.5 M solution: it holds 0.5 × 1 = 0.5 mol of solute. Add water until the volume is 2 litres, and it still holds 0.5 mol, because no solute was added or removed. The new molarity is 0.5 ÷ 2 = 0.25 M. The volume doubled, the molarity halved, and the moles stayed at 0.5.

Worked example: the same solute, three molarities

Start with 100 mL of a 2 M stock. It holds 2 × 0.1 = 0.2 mol of solute, because 100 mL is 0.1 L. Dilute it to 200 mL and the molarity is 0.2 ÷ 0.2 = 1 M. Dilute the same 0.2 mol to 1 litre and the molarity is 0.2 ÷ 1 = 0.2 M. The solute never changed: 0.2 mol in each case. Check each step with C1V1 = C2V2: 2 × 100 = 200 and 1 × 200 = 200, then 2 × 100 = 200 and 0.2 × 1,000 = 200.

The common mistake

The mistake is treating the dilution factor and the molarity as the same number. A tenfold dilution does not mean the solution is 10 M, and a 0.1 M solution was not necessarily diluted tenfold. A 2 M stock diluted tenfold becomes 0.2 M, and a 1 M stock diluted tenfold becomes 0.1 M: the same factor, different molarities, because the starting points were different.

Frequently asked questions

What is the difference between dilution and molarity?

Molarity is a measurement of strength in moles per litre. Dilution is the act of adding solvent to lower that strength. A dilution changes the molarity; it does not change the amount of solute.

Does dilution change the number of moles?

No. Diluting 1 litre of 0.5 M to 2 litres leaves 0.5 mol of solute in the solution; only the molarity falls, to 0.25 M.

How is molarity calculated?

Moles divided by litres. 0.5 mol in 1 litre is 0.5 M, and the same 0.5 mol in 2 litres is 0.25 M.

What does a tenfold dilution do to molarity?

It divides the molarity by ten. A 2 M stock diluted tenfold becomes 0.2 M, and a 1 M stock diluted tenfold becomes 0.1 M.

More guides on the Dilution Calculator

Try it yourself

Try the Dilution Calculator — free, in your browser.

Open the Dilution Calculator