← All blog posts

Dilution formula explained simply

WhiteUI · A plain-English guide to the Dilution Calculator

The dilution formula is six letters long: C1V1 = C2V2. C1 is the concentration of the stock solution, V1 is the volume of stock you take, C2 is the concentration you want, and V2 is the final volume.

Bar diagram comparing a 1 molar stock solution with the 0.1 molar solution made by diluting 10 millilitres of it to 100 millilitres
In plain words: 10 mL of 1 M stock holds the same amount of solute as 100 mL of 0.1 M solution. Adding 90 mL of water spreads it ten times thinner.

What C1, V1, C2 and V2 mean

C1 is the stock concentration, the strength of the bottle you start with, measured in M, which stands for moles per litre. V1 is the volume of that stock you measure out, in millilitres or litres. C2 is the target concentration, the strength you want to end up with, in the same unit as C1. V2 is the final volume, how much diluted solution you want, in the same unit as V1.

Why the formula works

That is what C1V1 is: the amount of solute in the stock you take. C2V2 is the amount of solute in the finished solution. Adding water does not add or remove any solute, so the two amounts must be equal, and that is exactly what C1V1 = C2V2 says.

Running the formula backwards

To find the stock volume, use V1 = C2 × V2 ÷ C1: to make 250 mL of 0.5 M from 2 M stock, V1 = 0.5 × 250 ÷ 2 = 62.5 mL. To find the final concentration, use C2 = C1 × V1 ÷ V2: 5 mL of 6 M stock made up to 100 mL gives C2 = 6 × 5 ÷ 100 = 0.3 M. To find the final volume a given amount of stock can make, use V2 = C1 × V1 ÷ C2: 10 mL of 2 M stock diluted to 0.5 M makes V2 = 2 × 10 ÷ 0.5 = 40 mL.

Worked example

Take 10 mL of a 1 M stock and make it up to 100 mL with water. The stock side is C1V1 = 1 × 10 = 10. The finished side must also come to 10, so C2 = 10 ÷ 100 = 0.1 M. A second example: 20 mL of 0.5 M stock made up to 200 mL gives C2 = 0.5 × 20 ÷ 200 = 0.05 M, another tenfold dilution. And a smaller one: 2 mL of 10 M stock made up to 50 mL gives C2 = 10 × 2 ÷ 50 = 0.4 M, a 25-fold dilution, because 50 ÷ 2 = 25.

The common mistake

People read C1V1 = C2V2 and then swap C1 and C2, which gives a nonsense answer. Suppose you want 100 mL of 0.1 M from a 1 M stock. The right sum is V1 = 0.1 × 100 ÷ 1 = 10 mL of stock. Swapped, it becomes V1 = 1 × 100 ÷ 0.1 = 1,000 mL of stock, which is ten times the final volume and plainly impossible.

Frequently asked questions

What is the dilution formula?

C1V1 = C2V2. C1 and V1 are the stock concentration and volume, C2 and V2 are the target concentration and final volume. The amount of solute is the same on both sides.

How do I find the stock volume?

Use V1 = C2 × V2 ÷ C1. For 250 mL of 0.5 M from 2 M stock, V1 = 0.5 × 250 ÷ 2 = 62.5 mL.

How do I find the final concentration?

Use C2 = C1 × V1 ÷ V2. 5 mL of 6 M stock made up to 100 mL gives 6 × 5 ÷ 100 = 0.3 M.

What is a tenfold dilution?

A dilution where the volume grows ten times and the concentration falls ten times. 10 mL of 1 M made up to 100 mL gives 0.1 M.

Why is my stock volume bigger than my final volume?

The concentrations are swapped. The stock concentration, C1, is the bigger number and goes underneath in the division: V1 = C2 × V2 ÷ C1.

More guides on the Dilution Calculator

Try it yourself

Try the Dilution Calculator — free, in your browser.

Open the Dilution Calculator