← All blog posts

Dilution: worked example step by step

WhiteUI · A plain-English guide to the Dilution Calculator

The best way to learn a formula is to watch it work once, slowly, with real numbers. This page does that for C1V1 = C2V2, using a dilution every school and college lab does: making 1 litre of 1 M solution from a 10 M stock. The answer is 100 mL of stock plus 900 mL of water.

Three boxes showing 100 millilitres of 10 molar stock plus 900 millilitres of water making 1 litre of 1 molar solution
In plain words: the stock is 10 M, the target is 1 M, and the final volume is 1 litre. One division gives 0.1 L of stock, and the rest is water.

Step 1: write down what you know

Start by listing the three numbers the formula needs, with their units. The stock concentration is C1 = 10 M. The target concentration is C2 = 1 M. The final volume is V2 = 1 L.

Step 2: put the numbers into the formula

The stock volume is V1 = C2 × V2 ÷ C1. Replace C2 with 1 M, V2 with 1 L and C1 with 10 M, and the sum becomes V1 = 1 × 1 ÷ 10.

Step 3: do the division and state the answer

1 × 1 ÷ 10 = 0.1, so the stock volume is 0.1 L, which is 100 mL. The water is the final volume minus the stock volume: 1 − 0.1 = 0.9 L, which is 900 mL.

A second example: a smaller batch

Now the same steps on a smaller scale. You need 500 mL of 0.25 M solution and your stock is 5 M. Step 1 gives C1 = 5 M, C2 = 0.25 M and V2 = 500 mL. Step 2 gives V1 = 0.25 × 500 ÷ 5 = 25 mL of stock. Step 3 gives water = 500 − 25 = 475 mL.

A third example: in millilitres throughout

You need 200 mL of 0.2 M solution from a 2 M stock. Step 1 gives C1 = 2 M, C2 = 0.2 M and V2 = 200 mL. Step 2 gives V1 = 0.2 × 200 ÷ 2 = 20 mL of stock. Step 3 gives water = 200 − 20 = 180 mL. Check it backwards: 2 × 20 = 40, and 0.2 × 200 = 40, so both sides of C1V1 = C2V2 come to 40 and the sum is right.

The common mistake

The mistake people make with worked examples is adding the full final volume of water instead of topping up. In the main example, that would mean 100 mL of stock plus a full 1 litre of water, giving 1.1 litres in total, and the concentration would be 10 × 100 ÷ 1,100 = 0.909 M, not the 1 M you wanted. The water is always the final volume minus the stock volume: 900 mL here, not 1 litre.

Frequently asked questions

How do I make 1 litre of 1 M solution from 10 M stock?

Take V1 = 1 × 1 ÷ 10 = 0.1 L, which is 100 mL of stock, then add 900 mL of water to reach 1 litre.

How do I make 500 mL of 0.25 M from 5 M stock?

Take V1 = 0.25 × 500 ÷ 5 = 25 mL of stock, then add 475 mL of water.

How do I check a dilution answer?

Multiply both sides: C1 × V1 should equal C2 × V2. For 200 mL of 0.2 M from 2 M stock, 2 × 20 = 40 and 0.2 × 200 = 40.

How much water do I add?

The final volume minus the stock volume. For 1 litre of 1 M from 10 M stock, that is 1,000 − 100 = 900 mL.

More guides on the Dilution Calculator

Try it yourself

Try the Dilution Calculator — free, in your browser.

Open the Dilution Calculator