Stair on mobile: doing it without an app
Staircases are measured on site, not at a desk, which makes a phone the natural tool for the calculation. A browser page is enough: no app to install, no account, just the rise measured on the spot and the answer before you leave the room.
Open the Stair Calculator in your phone’s browser at the staircase location. Enter the total rise from finished floor to finished floor, your target riser and the tread depth you plan to use. The step count, actual riser and total run update as you type, so you can test a deeper tread or a different target riser and see immediately whether the staircase still fits the available floor.
Worked example: a total rise of 300 cm with a target riser of 18 cm gives 300 ÷ 18 = 16.67, rounded to 17 steps. The actual riser is then 300 ÷ 17 = 17.65 cm, and with a tread depth of 27 cm the total run is (17 − 1) × 27 = 432 cm. A second staircase, 280 cm rise with a 17 cm target, gives 280 ÷ 17 = 16.47, rounded to 16 steps, an actual riser of 17.50 cm and a run of (16 − 1) × 26 = 390 cm with 26 cm treads.
Measure the rise with a tape or laser from the finished surfaces, not from bare concrete or joists, and note the result before you go. A rise measured at home from memory is the fastest way to plan a staircase that does not fit the real floors.
Frequently asked questions
Why round the step count instead of using the exact division?
Because you cannot build a fraction of a step. Rounding gives a whole number of steps, and the actual riser is then adjusted so all steps are equal. Equal risers matter far more than hitting the target exactly.
Why is the total run based on steps minus one?
Because the top step is the upper floor itself: you step from the last tread onto the landing, not onto another tread. Counting an extra tread would overstate the run by one tread depth.
What riser and tread sizes suit a home staircase?
Around 17 to 19 cm with a tread of 25 to 28 cm suits most homes. Local building rules may set limits, so check them before building. This calculator does the geometry, not the regulations.
More guides on the Stair Calculator
- How to calculate stair step by step
- Stair formula explained with an example
- Stair: a worked example from start to finish
- Stair mistakes most people make
- Stair for beginners: no maths background needed
- Stair FAQ: the questions everyone asks
- Stair shortcut method for quick answers
- Stair with units: converting inputs correctly
- Stair history: where the formula comes from
Enter your total rise, target riser and tread depth to see the step count and total run.