Stair: a worked example from start to finish
A staircase must climb 300 cm from one finished floor to the next. The builder aims for risers around 18 cm and treads of 27 cm. Those three numbers — 300, 18 and 27 — are all the calculation needs.
Step count first: 300 ÷ 18 = 16.67, which rounds to 17 steps. Actual riser next: 300 ÷ 17 = 17.65 cm per step, a touch under the 18 cm target but equal on every step. Total run last: (17 − 1) × 27 = 432 cm of floor space.
A second staircase checks the method on different numbers. Total rise 280 cm, target riser 17 cm: 280 ÷ 17 = 16.47, rounding to 16 steps. Actual riser is 280 ÷ 16 = 17.50 cm, and with 26 cm treads the run is (16 − 1) × 26 = 390 cm. In both cases the actual riser lands within the comfortable 17 to 19 cm range, which is the sign of a sensible target.
If the actual riser ever lands far outside that range, the answer is not to accept an awkward step but to reconsider the target or the staircase layout — a winder, a landing, or a different position. The calculation tells you the geometry; the layout decision is still yours.
Frequently asked questions
Why round the step count instead of using the exact division?
Because you cannot build a fraction of a step. Rounding gives a whole number of steps, and the actual riser is then adjusted so all steps are equal. Equal risers matter far more than hitting the target exactly.
Why is the total run based on steps minus one?
Because the top step is the upper floor itself: you step from the last tread onto the landing, not onto another tread. Counting an extra tread would overstate the run by one tread depth.
What riser and tread sizes suit a home staircase?
Around 17 to 19 cm with a tread of 25 to 28 cm suits most homes. Local building rules may set limits, so check them before building. This calculator does the geometry, not the regulations.
More guides on the Stair Calculator
- How to calculate stair step by step
- Stair formula explained with an example
- Stair mistakes most people make
- Stair for beginners: no maths background needed
- Stair FAQ: the questions everyone asks
- Stair on mobile: doing it without an app
- Stair shortcut method for quick answers
- Stair with units: converting inputs correctly
- Stair history: where the formula comes from
Enter your total rise, target riser and tread depth to see the step count and total run.