← All tools/Tools/Garden & Outdoor/Landscape Lighting Calculator
Landscape Lighting Calculator
Work out how many landscape lights a path or garden needs, and what size transformer they need.
Transformer size
5 fixtures · 50 W total
Keep the load under 80% of the transformer rating.
Breakdown
| Path fixtures | 5 |
| Extra accent lights | 0 |
| Total fixtures | 5 |
| Total watts | 50 W |
| Required (80% rule) | 62.50 W |
| Transformer size | 75 W |
| Recommended cable | 16 AWG |
How it works
Fixtures = ceil(run length ÷ spacing) Spacing defaults: path lights 8 ft, spotlights 12 ft, floodlights 20 ft Total fixtures = fixtures + extra accent lights Total watts = total fixtures × watts per fixture Required transformer = total watts ÷ 0.80 (the 80% load rule), rounded UP to the next standard size: 75, 150, 300 or 600 W Cable gauge: 16 AWG up to 150 W, 14 AWG up to 300 W, 12 AWG above 300 W
A 40 ft path with lights every 8 ft needs 40 ÷ 8 = 5 fixtures. At 10 W each that is 50 W total; 50 ÷ 0.80 = 62.5 W, so the next standard size up is a 75 W transformer, with 16 AWG cable.
Frequently asked questions
Why size the transformer at 80% of its rating?
A transformer running at full load runs hot and fails early. The 80% rule leaves headroom for voltage drop and future lights, so a 50 W load needs at least a 62.5 W transformer — a 75 W unit in practice.
How far apart should path lights be?
About 6–8 ft apart gives an even wash of light along a path without dark gaps. Spotlights for trees and features sit 10–15 ft apart, and floodlights 15–25 ft apart.
What cable gauge do I need?
For most small garden runs up to 150 W, 16 AWG low-voltage cable is enough. Use 14 AWG up to 300 W and 12 AWG above that, or for long runs where voltage drop dims the far lights.
Can I add lights to the transformer later?
Yes, if the total load stays under 80% of the transformer rating. Check the load first — if adding lights pushes it past 80%, step up to the next transformer size.
Do accent lights count towards the transformer size?
Yes. Every light on the run draws power, so add the accent lights to the fixture count before working out the total watts and transformer size.
More tools
Tell us what you think
Loving this tool, or stuck on something? Tell us — it takes a minute.
We’ll only use your name and email to reply if needed. The tool and page are filled in for you.