← All tools/Tools/Garden & Outdoor/Shed Calculator
Shed Calculator
Work out the framing lumber and sheet materials for a garden or storage shed, from its footprint.
Wall studs needed
44 ft perimeter · 120 sq ft floor
Breakdown
| Perimeter | 44 ft |
| Floor area | 120 sq ft |
| Wall studs | 43 |
| Plate lumber (3 plates) | 132 ft |
| Sheathing sheets (4 × 8 ft) | 4 |
| Rafter pairs | 6 pairs |
| Rafter length each | 6.32 ft |
| Total rafters | 12 |
How it works
Perimeter = 2 × (length + width) Wall studs = ceil(ceil(perimeter in inches ÷ stud spacing) + 4 corner studs) × 1.15, rounded up Plate lumber = perimeter × 3 (bottom plate + double top plate) Sheathing sheets = ceil(floor area ÷ 32 sq ft per 4 × 8 ft sheet) Rafter pairs = ceil(length in inches ÷ 24 in) + 1 Rafter length = √(half-width² + rise²), where rise = half-width × pitch ÷ 12
A 10 × 12 ft shed with 8 ft walls and 16 in stud spacing has a 44 ft perimeter: 44 × 12 ÷ 16 = 33 studs, + 4 corners = 37, + 15% = 42.55, rounded up to 43 studs. Plates are 44 × 3 = 132 ft, the 120 sq ft floor needs 4 sheets, and 6 rafter pairs (12 rafters) at 6.32 ft each suit a 4-in-12 pitch.
Frequently asked questions
Why add 15% to the stud count?
The 15% covers the extra studs around the door and window openings, plus headers, cripples and cutting waste. A plain shed with no openings needs fewer; a shed with wide doors needs more.
What are the 3 plates?
Every wall gets one bottom plate and a double top plate — three runs of lumber around the full perimeter. That is why plate lumber is the perimeter × 3.
How are the rafters worked out?
Rafter pairs are spaced 24 in apart along the shed length, plus one extra pair at the end, and each rafter’s length comes from the half-width and the roof pitch: length = √(half-width² + rise²), with rise = half-width × pitch ÷ 12.
Does this include the floor joists?
No — the studs, plates, sheathing and rafters here cover the walls and roof. Floor joists depend on the foundation type, so size those separately for a timber floor.
What does 4-in-12 roof pitch mean?
The roof rises 4 in for every 12 in of horizontal run. A steeper pitch sheds rain better but makes longer rafters; a shallower pitch is cheaper but needs good waterproofing.
More tools
Tell us what you think
Loving this tool, or stuck on something? Tell us — it takes a minute.
We’ll only use your name and email to reply if needed. The tool and page are filled in for you.